Participants

Total 673 presentations.
Presentation Title Presentation Type Country Status
Modelling investigation of 1D and 2D metamaterial lens
POSTER PRESENTATION Algeria Under Review
CONTRIBUTION TO THE STUDY OF THE RIGIDITY IN ROTARY FRICTION WELDING
POSTER PRESENTATION Algeria Under Review
A REVIEW ON HEAT TRANSFER ENHANCMENT WITH CONSTRUCTAL THEORY
ORAL PRESENTATION Turkey Under Review
THE EFFECT OF HIGH VOLUME AND HIGH SPEED MACHINING ON TOOL LIFE
ORAL PRESENTATION Turkey Under Review
Study the behavior of XC38 steel in sulfuric acid solution (H2SO4, 1M, 97%) in presence of extracted natural inhibitor using electrochemical techniques
POSTER PRESENTATION Algeria Under Review
Comparative study of strain based finite elements for plate bending
ORAL PRESENTATION Algeria Under Review
Decomposition of olive-miles wastewater (Zibar) by clay supported ZnO under solar simulated light
ORAL PRESENTATION Jordan Accepted
Optimization of GTAW welding process parameters of ferritic stainless steel weldments
POSTER PRESENTATION Algeria Under Review
Photocatalytic process using ZnO/UV for removal of dye in water
POSTER PRESENTATION Algeria Accepted
Algal microbial fuel cell for sustainable energy
POSTER PRESENTATION Turkey Accepted
theoretical investigation of performances of basin solar still with additional condenser
POSTER PRESENTATION Algeria Accepted
EARTH DAM FAILURE MECHANISMS INDUCED BY LIQUEFIABLE LAYER
ORAL PRESENTATION Algeria Accepted
A Chaotic Particle Swarm Optimization for workflow scheduling based on energy-aware in cloud computing environment
ORAL PRESENTATION Algeria Accepted
SEISMIC RESPONSE OF BACK-TO-BACK MSEWALLS
ORAL PRESENTATION Algeria Accepted
Optimum Phase Change Material Selection for a Building based on Economic Analysis and Heating/Cooling Load Simulation
POSTER PRESENTATION Iran Accepted
The Application of PCMs for Energy Storage in Solar Thermal Engineering
ORAL PRESENTATION Iran Accepted
Comparative study of the electrochemical corrosion behavior of two types of steel reinforcement in concrete (316 L stainless steel and 500 BS mild steel)
POSTER PRESENTATION Algeria Accepted
Partial discharge diagnostics on impregnated polypropylene films
POSTER PRESENTATION Algeria Accepted
Partial discharge in polypropylene capacitor models at low temperature
POSTER PRESENTATION Algeria Accepted
Experimental investigation and Using Design of experiments to evaluate the electrical discharge in polypropylene films
ORAL PRESENTATION Algeria Accepted
Elaboration of Cu2ZnSnSe4 Bulk Crystal for Solar Cells Application
POSTER PRESENTATION Algeria Accepted
Synthesis and characterization by comparative study of a plant-based inhibitor: application to the corrosion of a structural steel
POSTER PRESENTATION Algeria Accepted
Doping effects on the characteristics of 4H-SiC MESFETs
ORAL PRESENTATION Algeria Accepted
Doping effects on the characteristics of 4H-SiC MESFETs
POSTER PRESENTATION Algeria Accepted
Comparative Study between the MCSA used for Rotor Faults Diagnosis of Induction Motor
POSTER PRESENTATION Algeria Accepted
Numerical Investigation of MHD Flow Between two Rotating Plates with Injection/Suction
POSTER PRESENTATION Algeria Accepted
Contribution at the robust control of Motor-driver Connected in Series
POSTER PRESENTATION Algeria Under Review
INVESTIGATION OF MECHANICAL AND STRUCTURAL PROPERTIES ACROSS BUTT FUSION WELDED POLYETHYLENE PIPES
ORAL PRESENTATION Algeria Accepted
POSTER PRESENTATION Algeria Accepted
INTRINSIC AND EXTRINSIC VARYING EFFECTS ON PHOTOVOLTAIC SOLAR PANEL PARAMETERS FOR I-V AND P- V CURVES CHARACTERISTICS BY MATLAB/SIMULINK.
ORAL PRESENTATION Turkey Accepted
INTRINSIC AND EXTRINSIC VARYING EFFECTS ON PHOTOVOLTAIC SOLAR PANEL PARAMETERS FOR I-V AND P- V CURVES CHARACTERISTICS BY MATLAB/SIMULINK
ORAL PRESENTATION Turkey Accepted
Does Elasticity Matter in Cathodes for Secondary Batteries?
ORAL PRESENTATION Turkey Accepted
DFT Calculation of magnetic properties BaTi0.93M0.06O3
POSTER PRESENTATION Algeria Accepted
MIXED CONVECTIVE HEAT TRANSFER OF FLOW AROUND A RADIAL HEAT SINK
POSTER PRESENTATION Algeria Accepted
AN ANALYSIS OF PARAMETERS THAT EFFECTS PUBLIC TRANSPORTATION FUEL CONSUMPTION
ORAL PRESENTATION Turkey Accepted
EDM BASED HYBRID MACHINING METHODS
POSTER PRESENTATION Turkey Under Review
A systematic approach to process design in pull systems: An application in white goods sector
ORAL PRESENTATION Turkey Accepted
EFFECT OF CUTTING PARAMETERS ON CUTTING FORCES DURING THE MILLING OF CARBON FIBER REINFORCED POLYMERS (CFRP) WITH NANO-COMPOSITE-COATED CUTTING TOOLS
ORAL PRESENTATION Turkey Accepted
INVESTIGATION OF Mn-DOPED FTO THIN FILMS DEPOSITED BY SPRAY PYROLYSIS
POSTER PRESENTATION Algeria Accepted
Synthesis, characterization and DFT study of new complexes of palladium(II) and platinum(II) with derived sulfonamide ligand.
POSTER PRESENTATION Algeria Accepted
Effect of reaction parameters on the removal of cadmium ions Cd+2 using lagoon sludge
POSTER PRESENTATION Algeria Accepted
Green Route For Direct Synthesis Of Adipic Acid On Bimetallic Catalysts
POSTER PRESENTATION Algeria Accepted
Foliar damage caused by tropospheric ozone pollution on tomato in Algiers
POSTER PRESENTATION Algeria Accepted
COMPARISONS OF VARIOUS TECHNIQUES FOR REDUCTION OF BASELINE WANDER FROM ECG SIGNAL.
POSTER PRESENTATION Algeria Accepted
SYNTHESIS AND CHARACTERISATION OF THE CuIn0.65Ga0.35Se2 COMPOUND FOR PHOTOVOLTAIC APPLICATIONS
POSTER PRESENTATION Algeria Accepted
DYNAMIC MODELLING AND SIMULATION OF A COOLING SYSTEM
ORAL PRESENTATION Turkey Accepted
MATHEMATICAL MODELLING AND ANALYSIS OF A HEATING SYSTEM
ORAL PRESENTATION Turkey Accepted
Kinetic analysis of thermal decomposition of mirabilite using the model-fitting methods
ORAL PRESENTATION Turkey Accepted
GPR model for FGCPW Coplanar waveguide analysis
POSTER PRESENTATION Tunisia Under Review
NUMERICAL AND EXPERIMENTAL FATIGUE CRACK GROWTH ANALYSIS OF ROUND BAR SPECIMEN UNDER TENSION-TORSION COMBINED LOADING
ORAL PRESENTATION Turkey Accepted
COMPARISON OF 3-D MIXED MODE FATIGUE CRACK GROWTH ANALYSIS USING DIFFERENT ELEMENT TYPES ALONG THE CRACK FRONT
ORAL PRESENTATION Turkey Accepted
THE EFFECT OF CHANGES IN THE DESIGN OF THE CRANK CONNECTING ROD MECHANISM ON STRESS
POSTER PRESENTATION Turkey Accepted
Exergoeconomic analysis of a power/cooling combined cycle driven by geothermal heat source
ORAL PRESENTATION Turkey Accepted
DESIGN OF RECTANGULAR PATCH ANTENNA FOR RFID READER ANTENNA APPLICATIONS FOR ISM BAND WITH HIGH DIRECTIVITY AND GAIN
ORAL PRESENTATION Morocco Accepted
Theoretical study of two benzoxazole derivatives
POSTER PRESENTATION Algeria Accepted
Air temperature forecasting using artificial neural networks with delayed exogenous input
ORAL PRESENTATION Morocco Accepted
BAYESIAN APPROACH TO PREVENT RISKS IN CEMENT FACTORY
POSTER PRESENTATION Turkey Accepted
Investigation on the structural and photoluminescent properties of Cu(In,Ga)Se2 thin films for second generation solar cells
POSTER PRESENTATION Algeria Accepted
The influence of annealing on the properties of ZnO:Al transparent conductive oxyde layers obtained by sol-gel for thin film solar cell
POSTER PRESENTATION Algeria Accepted
Immune genetic algorithm for IoT and mobile cloud technologies Service Scheduling based on Energy-Awareness
ORAL PRESENTATION Algeria Accepted
Experimental investigation on the reduction of the drag Characteristics by rotary tubes in the wind tunnel
POSTER PRESENTATION Turkey Accepted
Photocatalytic degradation of pentachlorophenol under UV light combined with TiO2
POSTER PRESENTATION Algeria Accepted
Simulation of a twin-jet impinging a fixed flat plane with LES model
POSTER PRESENTATION Turkey Accepted
Although the measurement of body temperatures has been known to humans since antiquity, this has not prevented the profit from the astonishing progress of electronics in order to have more measuring temperature devices. Powerful and with acceptable accuracy. Through this work we aim to measure the body temperature of a subject by different devices. Make a physical characterization by exploiting the powerful computing and programming tool, namely the Matlab software. And towards the end make a comparison between these different devices from the point of view measurement efficiency.
ORAL PRESENTATION Algeria Accepted
Influence of elbow curvature on flow and turbulence structure through a Conduct Square Section with A 90˚ Elbow
POSTER PRESENTATION Turkey Accepted
MINIMIZATION OF PV PRODUCTION LOSSES BY ESTIMATING TOLERATED ERRORS OF PV INSTALATION IN ALGERIA
ORAL PRESENTATION Algeria Accepted
Level control of tanks using LMI based H∞ output feedback controller
ORAL PRESENTATION Turkey Accepted
STRUCTURAL DAMAGE DIAGNOSTIC THROUGH THE IDENTIFICATION OF MECHANICAL PROPRIETIES OF A CYLINDRICAL SHELL BY AN INVERSE METHOD
POSTER PRESENTATION Algeria Accepted
OPTIMAL REPARTITION OF HYBRID PV/WIND AND BIOMASS SYSTEMS
POSTER PRESENTATION Algeria Accepted
OPTIMAL DISTRIBUTION OF VARIOUS RESOURCES OF RENEWABLE ENERGY
POSTER PRESENTATION Algeria Accepted
COMPRATIVE ANALYSIS OF WEAR EVOLUTION OF HSS HELICAL DRILLS CUTTING EDGES DURING THE MACHINING OF HARDENED AND UNHARDENED C22 STEEL TO DETERMINE THE LIFETIME CRITERION
POSTER PRESENTATION Algeria Accepted
Effects of encapsulation glass erosion by sandblasting and temperature variation on solar panels efficiency
POSTER PRESENTATION Algeria Accepted
EROSION AND DAMAGE OF GLASS BY SAND PARTICLES
POSTER PRESENTATION Algeria Accepted
Quantitative risk assessment of onshore gasoline storage LNG Skikda
ORAL PRESENTATION Algeria Accepted
Comparative study of the electrochemical corrosion behavior of two types of steel reinforcement in concrete (316 L stainless steel and 500 BS mild steel)
POSTER PRESENTATION Accepted
Buoyancy forces and viscous dissipation effects on Ostwald-TiO2 nanofluid flow between a parallel plate channel
POSTER PRESENTATION Algeria Accepted
Synthesis, spectroscopic characterization and electrochemical study of the corrosion inhibitive efficiency of new α-aminophosphonate: Experimental and theoretical investigations
POSTER PRESENTATION Turkey Accepted
Study of Inhomogeneous barrier of Au/ n-InP schottky diodes using silvaco TCAD simulators
POSTER PRESENTATION Algeria Accepted
Study of Schottky Barrier Inhomogeneity by Silvaco TCAD Simulation
POSTER PRESENTATION Algeria Accepted
MD simulation of Nanoindentation of Cu nanowires : Influence of the indententer radius and indentation speed
POSTER PRESENTATION Algeria Accepted
The temperature dependence of barrier inhomogeneities of Ni/4H-SiC of Metal–Semiconductor contacts using I–V characteristics.
POSTER PRESENTATION Algeria Accepted
The impact of various nanoparticle shape on forced convection in a circular tube
POSTER PRESENTATION Algeria Accepted
Effects of Gas Flow Channels with Rectangular Blockages on PEM Fuel Cell Performance
ORAL PRESENTATION Turkey Accepted
RISK ASSESSMENT OF ONSHORE SYSTEMS USING BAYESIAN NETWORK
ORAL PRESENTATION Anguilla Accepted
CONTRIBUTION TO THE ASSESSMENT OF CSP TECHNOLOGIES FOR ELECTRICITY GENERATION IN ALGERIA: THE CASE OF 1MW SOLAR TOWER POWER PLANT
POSTER PRESENTATION Algeria Accepted
DESIGN AND CONTROL STRATEGY OF DIFFERENTIAL SCANNING CALORIMETRY
ORAL PRESENTATION Turkey Accepted
Method of Calculating Propeller Slipstream Drag on Airplane Performance
ORAL PRESENTATION Turkey Accepted
EFFECT OF MECHANICAL ACTIVATION ON THE ELECTRO-THERMAL EXPLOSION OF TI2ALC MAX PHASE
POSTER PRESENTATION Turkey Accepted
DEVELOPMENT OF A NEW SPLITTER PLATE-PRESSURE PROBE FOR FLOW FIELD MEASUREMENTS İN LOW SPEED WİND TUNNEL
ORAL PRESENTATION Turkey Accepted
Energy Efficient Airfoil Design and Optimization for Operation at Transonic Speeds
ORAL PRESENTATION Turkey Accepted
DESIGN AND CONTROL OF AN EXOSKELETON ROBOT: A MATLAB SIMSCAPE APPLICATION
ORAL PRESENTATION Turkey Accepted
Reduced-size microstrip patch antenna for wireless application
POSTER PRESENTATION Algeria Accepted
SEEKING THE TRENDABILITY OF PROGNOSTIC FEATURES TO ENHANCE BEARING REMAINING USEFUL LIFE PREDICTION
ORAL PRESENTATION Algeria Accepted
Analysis of a wideband U-slot loaded rectangular patch antenna in a superstrate geometry with an H-shaped patch
POSTER PRESENTATION Algeria Accepted
SYNTHESIS , THERMAL A AND STRUCTURAL CHARACTERISATION OF OXYFLUORO GLASS DOPES GADOLILIUM
SYNTHESIS , THERMAL A AND STRUCTURAL CHARACTERISATION OF OXYFLUORO GLASS DOPES GADOLILIUM
POSTER PRESENTATION Algeria Accepted
SYNTHESIS , THERMAL A AND STRUCTURAL CHARACTERISATION OF OXYFLUORO GLASS DOPES GADOLILIUM
SYNTHESIS , THERMAL A AND STRUCTURAL CHARACTERISATION OF OXYFLUORO GLASS DOPES GADOLILIUM
POSTER PRESENTATION Algeria Accepted
Investigation of the mechanism inhibition effect of yttrium salt on the corrosion of mild steel in 0.5 M NaCl under hydrostatic and hydrodynamic regime
POSTER PRESENTATION Algeria Accepted
Effect of density ratio and relative heights of the two immiscible and viscous fluid layers on the interfacial instability in a fully saturated porous media
ORAL PRESENTATION Morocco Accepted
Experimental Investigation of Mixed Convective Heat Transfer in Horizontal Circular Minichannels at a Uniform Heat Flux
ORAL PRESENTATION Turkey Accepted
THE EVOLUTION OF THE DAMAGE RESULTING FROM THE TRACTION TEST ON SUPER MARTENSITIC STAINLESS STEEL NOTCHED PIECES
POSTER PRESENTATION Turkey Accepted
DECISION SUPPORT SYSTEMS AND APPLICATION IN A CONSULTING FIRM
ORAL PRESENTATION Turkey Accepted
STUDY OF AN AMINOPHOSPHONIC COMPOUND AS A CORROSION INHIBITOR OF CARBON STEEL IN 1M HCl.
POSTER PRESENTATION Algeria Accepted
First-principles study of structural, elastic and electronic properties of Sr3XN (X = Ge, Sn and Pb) compoundsFirst-principles study of structural, elastic and electronic properties of Sr3XN (X = Ge, Sn and Pb) compounds
POSTER PRESENTATION Algeria Accepted
DATA MINING APPLICATIONS IN A FMCG COMPANY
ORAL PRESENTATION Turkey Accepted
LEAN MANUFACTURING AND SIX SIGMA APPLICATIONS IN AN AUTOMOBILE COMPANY
ORAL PRESENTATION Turkey Accepted
THE EFFECT OF TECHNOLOGICAL DEVELOPMENT AND APPLICATION TO RETAIL INDUSTRY AND CONSUMER
ORAL PRESENTATION Turkey Accepted
DATA MINING AND APPLICATION IN TELEMATICS DATA
ORAL PRESENTATION Turkey Accepted
CHEMICAL MACHINING OF MAGNESIUM AND ITS ALLOYS – A REVIEW
ORAL PRESENTATION Turkey Accepted
CFD Study of Mixing Characteristics in a Torus Reactor
POSTER PRESENTATION Turkey Accepted
MODULE AND BATTERY PERFORMANCES COMPARISON OF A PHOTOVOLTAIC SYSTEM FOR SMALL-SCALE SYSTEM
ORAL PRESENTATION Indonesia Accepted
FREE CONVECTIVE HEAT TRANSFER USING WATER-ETHYLENE GLYCOL MIXTURE BASED TiO2 NANOFLUIDS
POSTER PRESENTATION Algeria Accepted
Transient Stability-Constrained Optimal Power Flow with FACTS
POSTER PRESENTATION Afghanistan Accepted
EFFECT OF MERCERIZATION TEMPERATURE ON COMPOSITE PROPERTIES (JUTE / POLYESTER)
POSTER PRESENTATION Afghanistan Accepted
STUDY OF THE DAMAGE MECHANISMS OF A BI-DIRECTIONAL JUTE-POLYESTER COMPOSITE
POSTER PRESENTATION Algeria Accepted
Stress Intensity Factor KI and T-Stress Determination in HDPE Material
POSTER PRESENTATION Algeria Accepted
Characterization of the hydroxyapatite coating (HAP, Ca10 (PO4) 6 (OH) 2) on the titanium alloy (Ti-6Al-4V) for biomedical use
POSTER PRESENTATION Turkey Accepted
RISK ANALYSIS IN NATURAL GAS TRANSPORTANCE BY PIPELINE CASE OF GK2-SKIKDA NATURAL GAS PIPELINE
POSTER PRESENTATION Algeria Accepted
Structural, electronic, optical, elastic and thermal properties of La2(Al, Ga)N3
POSTER PRESENTATION Algeria Accepted
APPLICATION OF THE POSTULATE OF A. ACHENBACH FOR DETERMINING THE OPTIMUM WORKING HEIGHT OF THE COKE CUPOLA AND A ROW OF NOZZLES.
ORAL PRESENTATION Algeria Accepted
Comparisons of Various Techniques for Reduction of baseline wander from ECG signal.
ORAL PRESENTATION Algeria Accepted
The effect of heat treatment on Al-20wt% Nb alloys prepared by high frequency induction fusion
POSTER PRESENTATION Algeria Accepted
LMI-based Control Synthesis of Saturated Discrete-Time Fuzzy Systems
ORAL PRESENTATION Algeria Accepted
Effect of variable amplitude loading on fatigue crack growth of repaired structure
POSTER PRESENTATION Algeria Accepted
Study of the properties of some elements of CaSrSi (Tt=Si, Ge, Sn and Pb)
POSTER PRESENTATION Algeria Accepted
Perspective of Bio-ethanol production in the south of Algeria
ORAL PRESENTATION Algeria Accepted
STUDY OF COEFFICIENT OF PERFORMANCE OF THERMAL POWER STATION, JAMSHORO, SINDH, PAKISTAN
ORAL PRESENTATION Pakistan Accepted
Identification of cohesive fracture parameters by compact tension in combination with ANN optimization
POSTER PRESENTATION Algeria Accepted
IDENTIFICATION OF MECHANICAL BEHAVIOR OF NONLINEAR MATERIALS USING MICRO-INDENTATION TEST
POSTER PRESENTATION Algeria Accepted
FRACTURE CHARACTERIZATION AND MODELLING OF THE MECHANICAL BEHAVIOUR OF FLOAT GLASS
POSTER PRESENTATION Algeria Accepted
COUPLED HEAT AND MASS TRANSFERS IN BUILDING MATERIALS
POSTER PRESENTATION Algeria Accepted
expertise on very fine grains and the effect of grain size on isotropic hardening
expertise on very fine grains and the effect of grain size on isotropic hardening
POSTER PRESENTATION Algeria Accepted
expertise on very fine grains and the effect of grain size on isotropic hardening
expertise on very fine grains and the effect of grain size on isotropic hardening
POSTER PRESENTATION Algeria Accepted
Tribological study of the steel pairs in dynamic contact according to hardness
POSTER PRESENTATION Algeria Accepted
Tribological study of the steel couples in dynamic contact according to hardness
POSTER PRESENTATION Turkey Accepted
NEW OPEN-FRAME WORK TIN OXALATES SYNTHESIZED IN THE PRESENCE OF ORGANIC AMINE Bis 2-Amino pyridinum Cis dichloro Bis oxalate stannate(IV)
POSTER PRESENTATION Algeria Accepted
SIMULATION STUDY OF AEROSOL EFFECT ON OPTICAL EFFICIENCY OF SOLAR TOWER POWER PLANT IN GHARDAÏA-ALGERIA SITE
POSTER PRESENTATION Algeria Accepted
A 2-TUPLE FUZZY LINGUISTIC REPRESENTATION MODEL BASED DECISION AID FOR FUEL PROVIDER SELECTION IN TURKISH FOOD INDUSTRY
ORAL PRESENTATION Turkey Accepted
Organized Industrial Zones Efficiency Evaluation Using Data Envelopment Analysis
ORAL PRESENTATION Turkey Accepted
Understanding Basic Qualities of High Performance Concrete Use In Construction Environment
ORAL PRESENTATION Nigeria Accepted
Influence of the coupling between the mechanical characteristics and the welding conditions by the FSSW process: case of the bi-material aluminum-steel
POSTER PRESENTATION Algeria Accepted
“PARAMETRIC STUDY OF COMBINED COOLING AND POWER PLANT INTEGRATED WITH PARABOLIC TROUGH SOLAR COLLECTORS”
ORAL PRESENTATION Pakistan Accepted
“Competition Policy and its importance for innovative Economics”
ORAL PRESENTATION Georgia Accepted
Effect of technological parameters of manual arc welding on structural and mechanical properties of assembled steels
POSTER PRESENTATION Algeria Accepted
Heat treatment effect on intermetallic compounds of coatings obtained by hot-dip galvanizing process
ORAL PRESENTATION Algeria Accepted
Study of different modeling technics for building energy consumption
ORAL PRESENTATION Algeria Accepted
Inclusion shape and contrast effect modelling on composites effective thermal conductivity
POSTER PRESENTATION Algeria Accepted
Structural, elastic and thermodynamic properties of the LiZnX (X = N, As and Sb) filled-tetrahedral compounds: An ab initio FP-LAPW study
POSTER PRESENTATION Algeria Accepted
The Effect of Cryogenic Heat Treatment on Cutting Forces in Face Milling of Inconel 718 Superalloy
ORAL PRESENTATION Turkey Accepted
Prevention of industrial risks case of SONATRACH of Hesi R'mel (city of southern Algeria)
POSTER PRESENTATION Algeria Accepted
A Novel, Effective and Low-cost Catalyst for Electrooxidation of Formaldehyde in Alkaline Medium
POSTER PRESENTATION USA (United States Of America) Accepted
NATURAL CONVECTION IN AN ANNULUS WITH A PARTIALLY ELASTIC OUTER WALL UNDER THE EFEFCT OF INCLINED MAGNETIC FIELD
ORAL PRESENTATION Turkey Accepted
Dynamic response of strengthened beams by composite coats under moving force
POSTER PRESENTATION Algeria Accepted
Influence of wire drawing process on the copper used for electrical cables
POSTER PRESENTATION Algeria Accepted
A Model for Creep and Creep Damage in the Copper Alloy
POSTER PRESENTATION Algeria Accepted
EFFECT OF FLUOR ON THE PHYSICAL PROPERTIES OF ZNO SYNTHESIZED BY SPRAY PYROLYSIS TECHNIQUE
POSTER PRESENTATION Algeria Accepted
Practical study on the viscosity variation of engine oils as a function of service time
POSTER PRESENTATION Algeria Accepted
A CFD modeling of 3-D single serpentine PEM fuel cell stack
ORAL PRESENTATION Turkey Accepted
The effects of material characteristics on simulation of NDT electromagnetic problem
ORAL PRESENTATION Turkey Accepted
AXISYMMETRIC DEFORMATION ANALYSIS OF ROTATING-DISKS USING AN IMPPROVED ADOMIAN DECOMPOSITION METHOD
ORAL PRESENTATION Turkey Under Review
AXISYMMETRIC DEFORMATION ANALYSIS OF THICK-WALLED CYLINDERS SUBJECTED TO BOTH INTERNAL AND EXTERNAL PRESSURES USING A SEMI ANALYTICAL APPROACH
ORAL PRESENTATION Turkey Under Review
EFFECT OF RECTANGULAR HELIOSTAT SHAPE RATIO ON THE SPIRAL LAYOUT PERFORMANCE OF A SOLAR TOWER THERMAL POWER PLANT
POSTER PRESENTATION Algeria Accepted
FABRICATION AND CHARACTERIZATION OF Al2O3-CeO2 COATING ON TA6V FOR AEROSPACE APPLICATIONS
POSTER PRESENTATION Algeria Accepted
Elaboration and characterization of hydroxyapatite by aqueous precipitation
POSTER PRESENTATION Algeria Accepted
Structural and mechanical study of thin iron nitride films
POSTER PRESENTATION Algeria Accepted
STRENGTHENING THE CAPACITY OF DEVELOPING COUNTRIES ON THE USE OF RENEWABLE ENERGY APPLICATION, IN AGRICULTURE AND FOR SUSTAINABLE DEVELOPMENT
ORAL PRESENTATION Nigeria Accepted
STRENGTHENING THE CAPACITY OF DEVELOPING COUNTRIES ON THE USE OF RENEWABLE ENERGY APPLICATION, IN AGRICULTURE AND FOR SUSTAINABLE DEVELOPMENT
ORAL PRESENTATION Nigeria Accepted
Determination of treatability constant for an attached-growth fixed bed bioreactor
POSTER PRESENTATION Algeria Accepted
AN EXPERIMENTAL STUDY OF AN ECOMATERIAL BASED ON SEA SHELLS
POSTER PRESENTATION Algeria Accepted
A Novel approach for the determination of piezoelectric materials parameters
POSTER PRESENTATION Algeria Accepted
COLORED PİCOSECOND ACOUSTİCS İNVESTİGATİON OF STİFFNESS CONSTANT AND ACOUSTİC İMPEDANCE OF PİEZOELECTRİC LAYERS
POSTER PRESENTATION Algeria Accepted
Different formalisms of bi-isotropic nonlinear
POSTER PRESENTATION Algeria Accepted
Tribological study of the steel couples in dynamic contact according to hardness
POSTER PRESENTATION Turkey Accepted
Structural, electric and magnetic properties of Nickel / Cobalt thin films on Silicon substrate elaborate by thermal evaporation
POSTER PRESENTATION Albania Accepted
INVESTIGATION OF PV COLLECTOR DIRTINESS FOR SOLAR POWER PLANT PERFORMANCE
ORAL PRESENTATION Turkey Under Review
Microstructure of diffusion couples of the Ni-Sn systèm at atmospheric and at 10-8 atmospheric pressure
POSTER PRESENTATION Algeria Accepted
Comparative study of nitriding treatment on the physico-chemicals properties of two materials
POSTER PRESENTATION Algeria Accepted
Surface treatment and spectroscopic characterization of C22 treated steel
POSTER PRESENTATION Algeria Accepted
An advanced Modeling Approach of Multisource Systems for the Electrification of an Isolated Site
ORAL PRESENTATION Algeria Accepted
A NUMERICAL STUDY ON USING RIFLED TUBES IN WATER-WALLS OF EXISTING BOILERS OF TOUSS POWER PLANT
ORAL PRESENTATION Iran Accepted
Aeroelastic Modelling of a Wind Turbine Airfoil
ORAL PRESENTATION Algeria Accepted
Effect Of The Workpiece Position On The Manufacturing Tolerances
ORAL PRESENTATION Algeria Accepted
The effect of compression ratio on engine volumetric efficiency
ORAL PRESENTATION Turkey Accepted
Thermodynamic analysis of natural gas fired district energy system for multigeneration
ORAL PRESENTATION Turkey Accepted
MECHANICAL BEHAVIOR OF HDPE PIPE UNDER BIAXIAL STRESS
POSTER PRESENTATION Algeria Accepted
Density variations of biodiesel-diesel-isopropanol ternary blends
ORAL PRESENTATION Turkey Accepted
A parametric experimental study on biodiesel production from corn and hazelnut oils
ORAL PRESENTATION Turkey Accepted
PREDICTION of DENSITY of WASTE COOKING OIL ETHYL ESTER-DIESEL-ETHANOL TERNARY BLENDS at VARIOUS TEMPERATUES
ORAL PRESENTATION Turkey Accepted
The Investigation of Heat Transfer and Pressure Drop Characteristics of Lattice-structured Heat Sinks in a Rectangular Channel
ORAL PRESENTATION Turkey Accepted
AN EXPERIMENTAL STUDY OF AN ECOMATERIAL BASED ON SEA SHELLS
POSTER PRESENTATION Algeria Accepted
THE USE OF SAWDUST IN WATER TREATMENT
POSTER PRESENTATION Algeria Accepted
structural and magnetic study of pyrite FeS2
POSTER PRESENTATION Algeria Accepted
Analytical solution of magneto-hydrodynamic flow in convergent/divergent channel
POSTER PRESENTATION Algeria Accepted
INVESTIGATION OF EXERGY ANALYSIS OF SOLAR IRRADIATION FROM AKSARAY PROVINCE.
ORAL PRESENTATION Turkey Accepted
DILATOMETRIC AND CALORIMETRIC STUDY OF THE PRE-PRECIPITATION IN AN Al-Zn-Mg ALLOY
POSTER PRESENTATION Algeria Accepted
GREEN SYNTHESİS OF LUMİNESCENT CARBON QUANTUM DOTS FROM ORIGINAL TURKISH COFFEE
POSTER PRESENTATION Algeria Accepted
A Mathematical Approach for Assembly Line Balancing: 60*60 Built-in Oven Problem
ORAL PRESENTATION Turkey Accepted
PREDICTION OF SYNGAS HEATING VALUE FOR DOWNDRAFT GASIFIER BY USING ARTIFICIAL INTELLIGENCE APPROACH
POSTER PRESENTATION Turkey Accepted
CORROSION IN POLYMER MODIFIED CONCRETE BEAMS
ORAL PRESENTATION Jordan Accepted
POSSIBILITIES OF REDUCING ENVIRONMENTAL PRESSURE FROM TRAFFIC FACILITIES
POSTER PRESENTATION Bosnia and Herzegovina Accepted
Theoretical investigation of the structural, electronic, optical, elastic and thermodynamic properties of the quaternary diamond-like semiconductors Cu2MgSiS4 and Cu2MgGeS4
POSTER PRESENTATION Algeria Accepted
Liquid fuels from natural gas
POSTER PRESENTATION Algeria Accepted
CRACK EXTENSION IN A THIN AL 6061-T6 SHEETS UNDER MIXED MODE I/II LOADING
POSTER PRESENTATION Turkey Accepted
Numerical Study of Haemodynamics Behaviour in Renal Artery using Fluid – Structure Interaction
POSTER PRESENTATION India Accepted
Haemodynamics study in subject-specific abdominal aorta with renal bifurcation using CFD - A case study
ORAL PRESENTATION India Accepted
INFLUENCE OF QUENCHING MEDIUM ON MICROSTRUCTURE AND MECHANICAL BEHAVIOR OF HSLA-X70 WELDS
POSTER PRESENTATION Turkey Accepted
MODELLING OF PIEZO-STRUCTURE INTERACTION FOR DE-BONDING CONFIGURATION USING ELECTRO-MECHANICAL IMPEDANCE TECHNIQUE
POSTER PRESENTATION India Accepted
HYDRODYNAMIC STABILITY ANALYSIS OF A PLAN CHANNEL FLOW OF A VISCOELASTIC FLUD MODEL WITH CROSS-FLOW (INJECTION / ASPIRATION)
ORAL PRESENTATION Morocco Accepted
Crystal structure and surface morphology of electrodeposited Mo coated onto Cu substrate under high currents density for solar cells application
Algeria Accepted
A PRELIMINARY STUDY ON BENTONITE AS COAGULANT AID IN WASTEWATER TREATMENT
POSTER PRESENTATION Algeria Accepted
OPTIMIZATION OF ENERGY HARVESTING PIEZOELECTRIC BY MPPT TECHNIQUE
POSTER PRESENTATION Algeria Accepted
Evaluation and contribution to the study of urban road traffic using the microscopic model combined with the cellular automata model
ORAL PRESENTATION Turkey Accepted
On the fundamental mechanical behavior under hydrostatic prussure of CaXO3 (X= Sn and Hf) distorted perovskites from ideality: Computational Ab initio study.
ORAL PRESENTATION Algeria Accepted
Simulation of the thermomechanical loads and crack propagation of different diesel engine piston crown materials by the XFEM method
POSTER PRESENTATION Algeria Accepted
Lattice dynamics and thermal expansion of Li-based ternary semiconductors
ORAL PRESENTATION Algeria Accepted
CHEMICAL CHARACTERISTICS AND SOURCE RECONCILIATION OF ATMOSPHERIC AEROSOLS IN ALGIERS CITY AREA
ORAL PRESENTATION Algeria Accepted
Investigation the effects of sintering temperatures on the microstructure and mechanical properties of sintered WC-reinforced iron based composites
POSTER PRESENTATION Algeria Accepted
DEVELOPPEMENT OF A NANO-LIQUID CHROMATOGRAPHY METHOD FOR THE QUANTIFICATION OF HESPERETIN IN HUMAN URINE
POSTER PRESENTATION Algeria Accepted
EVALUATING THE PERFORMANCE OF A SOLAR ENERGY ASSISTED DRYING SYSTEM FOR DIFFERENT FOOD PRODUCTS IN OSMANIYE CLIMATIC CONDITIONS
ORAL PRESENTATION Turkey Accepted
Robust Adaptive Fuzzy Sliding Mode Control of DC-DC converter
POSTER PRESENTATION Algeria Accepted
GENERATION OF A COSINE-GAUSS BEAM WITH A FRENSEL BIPRISM FOR USE IN MICRO-MACHINING
POSTER PRESENTATION Algeria Accepted
Theoretical investigation on the impact of dielectric working fluid on the flow parameters of an electrohydrodynamically driven axially grooved flat mini heat pipe
ORAL PRESENTATION Tunisia Accepted
Characterization and Optimization of Graded Index SiO2-TiO2 Films Deposited by ECR-PECVD. For Photovoltaic Applications
POSTER PRESENTATION Algeria Accepted
First Principle Study of X3Zr (X = Pt, Pd, Rh and Ir) Structural Electronic and Thermodynamic Behavior
ORAL PRESENTATION Algeria Accepted
Heat flux effect on the current-voltage output for a compound parabolic concentrator- photovoltaic (CPC-PV)
ORAL PRESENTATION Turkey Accepted
Influence of Ta on the mechanical properties of Cu-Alloys by MD simulation
POSTER PRESENTATION Algeria Accepted
THE CHALLENGES OF THERMAL REHABILITATION IN BUILDINGS
POSTER PRESENTATION Algeria Accepted
Numerical simulation of the flow inside an axial drilling turbine
ORAL PRESENTATION Algeria Accepted
Numerical study of the behaviour of a cellular material subjected to a falling weight.
POSTER PRESENTATION Algeria Accepted
Energy and Exergy Analysis of Ranque-Hilsch Vortex Tube System and Air-Cycle System for Refrigeration Application: A Comparative Study
ORAL PRESENTATION Iran Accepted
Microstructural and formability properties of the ball-milled Ni80Cr20 powder mixture
POSTER PRESENTATION Algeria Accepted
THE STUDY OF THE MECHANICAL BEHAVIOR OF STRUCTURE USING PLAXIS 3D
POSTER PRESENTATION Algeria Accepted
Photon-atoms interaction and photo-voltaic phenomena
ORAL PRESENTATION France Accepted
FABRICATION AND CHARACTERIZATION OF Al2O3-CeO2 COATING ON TA6V FOR AEROSPACE APPLICATIONS
POSTER PRESENTATION Algeria Accepted
Evolutıon of photochemical pollution by tropospheric ozone and its precursors in two urban and suburban sits on Algiers
POSTER PRESENTATION Algeria Accepted
EFFECT OF ORGANIC SOLVENTS ON MECHANICAL PROPERTIES OF INNER AND OUTER WALL FOR A 100+ HIGH DENSITY POLYETHYLENE PIPE.
POSTER PRESENTATION Algeria Accepted
Elaboration and characterization of hydroxyapatite by aqueous precipitation
POSTER PRESENTATION Algeria Accepted
MODELING AND ESTIMATION OF METHYL ORANGE REMOVAL EFFICIENCY USING NON-LINEAR REGRESSION
POSTER PRESENTATION Turkey Accepted
DEGRADATION OF MAGNESIUM ALLOYS POTENTIALLY USED AS ORTHOPEDIC BIOMATERIALS
POSTER PRESENTATION Algeria Accepted
PARAMETRIC OPTIMIZATION OF TIG DISSIMILAR WELDING USING TAGUCHI METHOD
POSTER PRESENTATION Turkey Accepted
Biomethane production from codigestion of organic fraction of urban waste and organic farm waste
ORAL PRESENTATION Algeria Accepted
waste paper for ethanol production
POSTER PRESENTATION Algeria Accepted
Influence of Titanium and Aluminium addition on microstructure and mechanical properties of Ferritic Stainless Steel welds
POSTER PRESENTATION Algeria Accepted
The Main Geothermal Reservoirs in the South Algeria and their Interest for Local Economic Development
ORAL PRESENTATION France Accepted
PREPARATION OF PMMA/GLASS FIBERS COMPOSITES LOADED WITH ORGANIC PARTICLES
POSTER PRESENTATION Algeria Accepted
A Continuous Anaerobic Co-Digestion of poultry Waste and food waste at thermophilic Range
POSTER PRESENTATION Algeria Accepted
THERMO-HYDRODYNAMIC ANALYSIS OF A JOURNAL BEARING DEMONSTRATION APPARATUS
ORAL PRESENTATION Turkey Accepted
DUAL RANDOMIZED SPACE VECTOR MODULATION FOR INVERTER-FED INDUCTION MOTOR DRIVES
POSTER PRESENTATION Algeria Accepted
AEROACOUSTIC ANALYSIS OF AN AIR-REED INSTRUMENT USING LARGE EDDY SIMULATION
ORAL PRESENTATION Turkey Accepted
LARGE EDDY SIMULATION OF A DUCTED WIND TURBINE FOR AEROACOUSTIC PREDICTIONS
ORAL PRESENTATION Turkey Accepted
AERODYNAMIC PERFORMANCE OF SMALL SCALE VERTICAL AXIS WIND TURBINES UNDER EXTREME WIND CONDITIONS
ORAL PRESENTATION Turkey Accepted
THE RESEARCH OF THE ENAMEL FRITS WITH LITHIUM EFFECTS ON SURFACE CHARACTERISTICS OF VITREOUS ENAMEL COATINGS
ORAL PRESENTATION Turkey Accepted
STUDY THE MOMECHANICAL BEHAVIOR OF A MATERIAL BY METAHEURISTIC METHODS
POSTER PRESENTATION Algeria Accepted
AN EXPERIMENTAL STUDY ON MECHANICAL OF A COMPOSITE MATERIAL FOR ORTHOPEDIC USE
POSTER PRESENTATION Algeria Accepted
A Techno-Economic Model for Evaluation of Heating of Industrial Greenhouse Regions
ORAL PRESENTATION Turkey Accepted
THE EFFECTS OF CRYOGENICALLY TREATED CFRP COMPOSITE ON THE BUCKLING BEHAVIOR IN ADHESIVELY BONDED BEAM
ORAL PRESENTATION Turkey Accepted
STABILITY ANALYSIS OF A FIBER REINFORCED COMPOSITE PLATE SUBJECTED TO HYGRO- THERMAL LOADING
ORAL PRESENTATION Turkey Accepted
Energy Saving and Sustainability by Using Solar Energy in Indoor Lighting: Case Study
ORAL PRESENTATION Turkey Accepted
Finite element analysis of the temperature effect on the plastic behavior of polymers during high pressure torsion process.
ORAL PRESENTATION Algeria Accepted
MODELLING AND VIBRATION ANALYSES OF A HIGH SPEED RAIL VEHICLE
ORAL PRESENTATION Turkey Accepted
Snap-Through Instability of a Truss Structure Under Thermal Environment
POSTER PRESENTATION Turkey Accepted
IMPROVING ACCURACY OF OVERHANGING STRUCUTRES FOR SELECTIVE LASER MELTING
ORAL PRESENTATION Turkey Accepted
Contribution to the detection of a mass imbalance of an asynchronous motor by the Motor Current Signature Analysis
POSTER PRESENTATION Algeria Accepted
DEFINING AND REGULATING PARAMETERS FOR DIAGHRAM SEALS TO SHORTEN TEST PERIOD
ORAL PRESENTATION Turkey Accepted
MULTI-OBJECTIVE OPTIMIZATION OF INSERT CLAMPING METHODS AND CUTTING PARAMETERS IN TURNING OF AISI 1040 CARBON STEEL
ORAL PRESENTATION Turkey Accepted
EFFECT OF CORE DENSITY ON THE BENDING FATIGUE BEHAVIOUR AND FAILURE MODES OF HONEYCOMB SANDWICH STRUCTURE
POSTER PRESENTATION Algeria Accepted
MECHANICAL COMPORTEMENT OF A CEMENT PLANT ROTARY KILN
POSTER PRESENTATION Algeria Accepted
A Numerical Study of Natural Convection in an Inclined Square Enclosure with Conducting Body using Immersed Boundary Method
POSTER PRESENTATION Algeria Accepted
Bioreactors designed for biohydrogen production: a renewal bioenergy
ORAL PRESENTATION Algeria Accepted
COMPARISON STUDY OF LATTICE BOLTZMANN AND FINITE VOLUME METHODS FOR NATURAL CONVECTION SIMULATION IN SQUARE CAVITY
POSTER PRESENTATION Algeria Accepted
Real-Time Simulation Fault diagnosis for VSI-PMSM drives using mean-RMS values of three phase currents
POSTER PRESENTATION Algeria Accepted
Effect of the temperature and the field amplitude on the longitudinal Dynamic Hysteresis in a single domain nanoparticles.
POSTER PRESENTATION Algeria Accepted
EFFECT OF CARBONATION ON THE MECHANICAL STRENGTH OF PRECAST CONCRETE ELEMENTS
ORAL PRESENTATION Algeria Accepted
Effect of Balls and Cones on Heat Transfer Enhancement in Circle Tube
ORAL PRESENTATION Iraq Accepted
GENERATION OF BESSEL BEAM FOR MATERIALS PROCESSING
POSTER PRESENTATION Algeria Accepted
SHELF-EDGE TECHNOLOGIES ON THE OPEN FRONTED TYPE REFRIGERATED DISPLAY CABINETS
POSTER PRESENTATION Turkey Accepted
Physicochemical and electrochemical study of positive active mass (PAM) Modified by the addition of Bismuth.
POSTER PRESENTATION Algeria Accepted
Frost generation study and defrosting using machine learning
ORAL PRESENTATION India Accepted
Effect of a surfactant additive on the electrochemical on behaviors of positive lead-acid battery plate
POSTER PRESENTATION Algeria Accepted
Solar cells parameters extraction using I–V characteristics
POSTER PRESENTATION Algeria Accepted
Experimental investigation of the crushing of aluminum honeycomb cores under compression tests
POSTER PRESENTATION Algeria Accepted
Statistical analysis of austenitic stainless steel AISI 316L machining using PVD cermet tool
POSTER PRESENTATION Algeria Accepted
Experimental study on static behaviour of Aluminum Honeycomb sandwich composites under three point bending tests
POSTER PRESENTATION Algeria Accepted
Dry Sliding Wear Performances and corrosion resistance of 13Cr5Ni2Mo Super-Martensitic Stainless Steel
ORAL PRESENTATION Algeria Accepted
ANALYSIS OF COUPLE-STRESSES AND PIEZO-VISCOUS EFFECTS IN A LAYERED CONNECTING-ROD BEARING USING A GLOBAL THERMAL APPROACH
ORAL PRESENTATION Turkey Accepted
Voltage stability improvement of Power System using STATCOM
ORAL PRESENTATION Algeria Accepted
Improvement of thermal exchanges in the dynamic vein of a solar collector
POSTER PRESENTATION Algeria Accepted
Metrological study of the dimensional measurement method without reverse engineering
POSTER PRESENTATION Algeria Accepted
SENSORLESS ROTOR FİELD ORİENTED CONTROL FOR INDUCTİON MOTOR IMPLEMENTATİON USİNG DSPACE DSP DS1104
POSTER PRESENTATION Algeria Accepted
FREE VIBRATION ANALYSIS OF ELASTICALLY SUPPORTED TIMOSHENKO BEAMS USING THE ISOGEOMETRIC APPROACH
POSTER PRESENTATION Algeria Accepted
MICROPARTICLE SIZE AND MORPHOLOGY BY LIGHT SCATTERING
POSTER PRESENTATION Algeria Accepted
Performance analysis of absorption heat transformer systems using NH3/ionic liquid working pairs
ORAL PRESENTATION Turkey Accepted
Performance Assessment of High-Temperature Kalina Cycle for Waste Heat Recovery from a Diesel Engine
ORAL PRESENTATION Turkey Accepted
CHEMICAL MECHANICAL FINISHING OF OPTICAL MATERIALS
POSTER PRESENTATION Algeria Accepted
Structural, electronic, optical and thermodynamic properties of group III-nitrides in wurtzite phase from first-principles approach
POSTER PRESENTATION Turkey Accepted
DEVELOPMENT AND CHARACTERIZATION OF HYDROXYAPATITE FOR BONE USE.
POSTER PRESENTATION Algeria Accepted
Nucleation Kinetics of Heterogeneous Catalyst: Pd/MgO (100)
POSTER PRESENTATION Algeria Accepted
PREDICTION OF As (III) REMOVAL EFFICIENCY FROM WATER USING NON-LINEAR REGRESSION MODEL
POSTER PRESENTATION Turkey Accepted
MODELISATION OF FLANK WEAR OF MIXED CERAMIC INSERT IN HARD TURNING USING RSM AND ANN METHODS
ORAL PRESENTATION Turkey Accepted
MATHEMATICAL MODEL OF REGENERATIVE PAIRS IN A BEER TUNEL PASTEURIZER
ORAL PRESENTATION Turkey Accepted
EFFECT OF TRANSVERSE ECCENTRIC BALLISTIC DAMAGE ON STATIC TORSIONAL STRENGTH OF TAIL DRIVE SHAFT OF HELICOPTER
ORAL PRESENTATION Pakistan Accepted
A SLIP-LINE MODEL FOR SERRATED CHIP FORMATION IN MACHINING WITH SHARP CUTTING TOOL AND VALIDATION
ORAL PRESENTATION Turkey Accepted
CUTTING FORCES IN SUSTAINABLE TURNING OF AISI 304 AUSTENITIC STAINLESS STEEL
ORAL PRESENTATION Turkey Accepted
Investigation of Drying Behavior of Seedless Grapes in Different Dryers
POSTER PRESENTATION Turkey Accepted
INVESTIGATION OF THE HEAT GENERATION ON THE TROCHOIDAL MILLING OPERATIONS
ORAL PRESENTATION Turkey Accepted
MAGNETIC IMPROVEMENT OF THE STRENGTHS BY THE POLES OF ZINC FERRITE.
POSTER PRESENTATION Algeria Accepted
A REVIEW OF THE PIPELINE DESIGN USING STRAIN BASED DESIGN
ORAL PRESENTATION Algeria Accepted
Turkey Accepted
COOLING TECHNOLOGY AND THERMODYNAMIC APPLICATIONS FOR FOOD PRESERVATION
ORAL PRESENTATION Turkey Accepted
A DISCUSSION ABOUT THE INTRODUCTION OF PRECISION AGRICULTURAL TECHNOLOGIES WITH THEIR APPLICATION FIELDS AND CURRENT STATE
ORAL PRESENTATION Turkey Accepted
KINETIC AND THERMOGRAVIMETRIC INVESTIGATION OF THE CO-COMBUSTION OF ALMOND SHELLS AND IMBAT COAL BLEND
ORAL PRESENTATION Turkey Accepted
THERMAL AND MORPHOLOGICAL PROPERTIES OF SODIUM CARBOXYMETHYL CELLULOSE FILM
ORAL PRESENTATION Turkey Accepted
ESTIMATION OF Zn(II) REMOVAL EFFICIENCY FROM WASTE WATER BY USING NON-LINEAR REGRESSION MODEL
POSTER PRESENTATION Turkey Accepted
Influence of Air Temperature and Pretreatments on the Drying Characteristics of Cherry Tomato
POSTER PRESENTATION Turkey Accepted
Preparation, structural, and morphological properties of nickeI-ron alloy nanostructure
POSTER PRESENTATION Algeria Accepted
Preparation, structural, and morphological properties of Ni-Fe alloy nanostructure
POSTER PRESENTATION Algeria Accepted
FATIGUE LIFE-BASED RELIABILITY ASSESSMENT OF A HEAVY VEHICLE LEAF SPRING UNDER RANDOM STRAIN LOADING
ORAL PRESENTATION Malaysia Accepted
STUDY OF THE NOZZLE PLUGGING PHENOMENON
POSTER PRESENTATION Algeria Accepted
Predictive modeling of surface roughness and cutting force in turning of AISI 304 using RSM
POSTER PRESENTATION Algeria Accepted
Electrical characterization of CuInS2 crystals and polycrystalline thin films obtained by coevaporation technique
POSTER PRESENTATION Algeria Accepted
A COMPARISON OF MULTIPHASE MODELS FOR NUMERICAL THERMAL PERFORMANCE ANALYSIS OF VACUUMED HEAT PIPE
ORAL PRESENTATION Turkey Accepted
NUMERICAL THERMAL PERFORMANCE ANALYSIS OF VACUUMED HEAT PIPE BY USING MIXTURE MODEL
ORAL PRESENTATION Turkey Accepted
The overpressure effect determination of death probability using an abacus
Algeria Accepted
The overpressure effect determination of death probability using an abacus
ORAL PRESENTATION Algeria Accepted
Mechanical And Thermomechanical Properties Of Poly (Methylmethacrylate)
POSTER PRESENTATION Algeria Accepted
Elastic and mechanical properties of Ps/TiO2 composite
POSTER PRESENTATION Algeria Accepted
Effect of Pretreatment on Drying Time and Quality of Strawberry
POSTER PRESENTATION Turkey Accepted
Study of the influence of the distribution of defects caused by sanding on the properties of a soda-lime glass.
POSTER PRESENTATION Algeria Accepted
Statistical approach to mechanical behaviour of a glass eroded by sand blasting
POSTER PRESENTATION Algeria Accepted
DISCONTINUOUS PRECIPITATION AND DISSOLUTION IN AZ91 ALLOY
POSTER PRESENTATION Turkey Accepted
Optical Characterization and Properties of Polymeric Materials
POSTER PRESENTATION Algeria Accepted
Comparative Study of the g-Alumina to α-Alumina phase transformation spectra by XDR and FTIR
POSTER PRESENTATION Algeria Accepted
Protection of Carbon Steel X48 corrosion with 1,1'-((1E,1'E)-((4-methyl-1,2- phenylene)bis(azanylylidene))bis(methanylylidene))bis(naphthalen-2-ol) in 0.5 M H2SO4 solution
POSTER PRESENTATION Algeria Accepted
3-Dimensional Numerical Simulation of Helical Coil Heat Exchangers
ORAL PRESENTATION Turkey Accepted
NUMERICAL MODELING OF DYNAMIC STALL IN VERTICAL AXIS WIND TURBINE USING THE DETACHED EDDY SIMULATION APPROACH
ORAL PRESENTATION Algeria Accepted
Photo-catalytic reduction of hexavalent chromium (Cr(VI)) under visible light with Bi-Zn co-doped TiO2.
POSTER PRESENTATION Algeria Accepted
TECHNOLOGICAL STUDY OF POLISHING ANIMATED BY A VIBRATORY MOVEMENT
POSTER PRESENTATION Algeria Accepted
SURFACE TEXTURE EVOLUTION OF A HARD STEEL DURING THE BELT GRINDING PROCESS
POSTER PRESENTATION Algeria Accepted
RECENT ADVANCES IN HOT VIBRATION ASSISTED MACHINING
ORAL PRESENTATION Turkey Accepted
KINETIC ANALYSIS OF WHEAT STRAW PYROLYSIS USING MODEL FREE METHODS
ORAL PRESENTATION Turkey Accepted
Limits of the Boussinesq approximation in a differentially-heated square cavity filled with a participating medium
POSTER PRESENTATION Algeria Accepted
Modeling and simulation of a small scale solar organic Rankine cycle system with thermal storage unit
ORAL PRESENTATION Turkey Accepted
NUMERICAL INVESTIGATION OF MIXED CONVECTION OF CU-WATER NANOFLUID IN A CIRCULAR DUCT
POSTER PRESENTATION Algeria Accepted
STUDY OF CHANGES OF MECHANICAL PROPERTIES OF AN AGED COMPOSITE BY DIGITAL IMAGE CORRELATION
POSTER PRESENTATION Algeria Accepted
Synthesis, characterization and thermal processing of TiO2 Co- doped with Bismuth and Tungsten for a Photo-Catalytic Efficiency under sun light.
POSTER PRESENTATION Algeria Accepted
INVESTIGATION OF DOWNDRAFT GASIFIER MODELING BY USING NEURAL NETWORKS
ORAL PRESENTATION Turkey Accepted
Mathematical Modelling of Mushroom Drying Using Cabinet Dryer
POSTER PRESENTATION Turkey Accepted
MODELING OF CRACK GROWTH IN BRAKE DISC
POSTER PRESENTATION Algeria Accepted
MHD counter-rotating flow in a coaxial cylinders
ORAL PRESENTATION Algeria Accepted
Study of a chiral fractal resonator
POSTER PRESENTATION Algeria Accepted
Numerical Simulation of Natural Convection in a Differentially Heated Cavity Filled with an Al2O3-Water Nanofluid
ORAL PRESENTATION Turkey Accepted
Study of Chiral Photonic Crystal nanostructures using COMSOL Multiphysics
POSTER PRESENTATION Algeria Accepted
FATIGUE CRACK IN A RAILWAY AXLE UNDER VARIABLE AMPLITUDE LOADING
ORAL PRESENTATION Algeria Accepted
A REVIEW OF MODULATION ASSISTED MACHINING OPERATIONS IN MANUFACTURING
ORAL PRESENTATION Turkey Accepted
A REVIEW OF HOT MACHINING OPERATIONS IN MANUFACTURING ENVIRONMENT
ORAL PRESENTATION Turkey Accepted
Metrological Evaluation of the Effect of Process Parameters on Mechanical Specification at Brazing of Copper Pipe
POSTER PRESENTATION Turkey Accepted
PARTIAL COMBUSTION BEHAVIOR AND KINETIC ANALYSIS OF SUNFLOWER
POSTER PRESENTATION Turkey Accepted
Relativistic Quantum Electromagnetic Wave and Relativistic Atom Interaction, Application to Solar Panel
ORAL PRESENTATION France Under Review
A NUMERICAL STUDY; THE MOVEMENT OF INTERFACES IN PHASE CHANGE AT THE THERMAL STORAGE SYSTEMS
ORAL PRESENTATION Turkey Accepted
PREPARATION OF KITS FOR THERMAL PROPERTIES OF AGRILCULTURE NANOCOMPOSITE MATERIALS FOR BIOTECHNOLOGY
POSTER PRESENTATION Turkey Accepted
ASSESSMENTS OF PYROLYSIS KINETICS AND MECHANISMS OF CELLULOSE USING THERMOGRAVIMETRY
POSTER PRESENTATION Turkey Accepted
Numerical Investigation of Parabolic Trough Solar Collector Tubes with Geometry Modifications and Inserts using Nanofluid
ORAL PRESENTATION Pakistan Accepted
Experimental process design for energy saving and stress reduction in convective drying of agro-food products
ORAL PRESENTATION Tunisia Accepted
EFFECT OF CUTTING PARAMETERS ON CUTTING FORCES DURING THE MILLING OF CARBON FIBER REINFORCED POLYMERS (CFRP) WITH NANO-COMPOSITE-COATED CUTTING TOOLS
ORAL PRESENTATION Turkey Accepted
Improvement in Adhesion of Sandwich Structures with Polypropylene Honeycomb Core Depending on Surface Roughness and Fabrication Method
ORAL PRESENTATION Turkey Accepted
Analysis of a 1D Biisotropic Photonic Crystal: Case of Chiral-Tellegen Media
POSTER PRESENTATION Algeria Accepted
Dynamic Stress Analysis of a Flexible Manipulator with Payloads
ORAL PRESENTATION Turkey Accepted
New method for adjusting the thermal performances of flat plate collectors in dynamic mode under transient conditions.
POSTER PRESENTATION Algeria Accepted
DEVELOPMENT OF A LOW-COST KNEE REHABILITATION ROBOT FOR THERAPEUTIC EXERCISES
ORAL PRESENTATION Turkey Accepted
Deflection and modal analysis of a hollow square sectioned aluminium cantilever beam with addition of vertical reinforcement plate
ORAL PRESENTATION Turkey Accepted
IN SITU MEASUREMENT OF FRICTION FORCE IN FREE ABRASIVE LAPPING PROCESS
POSTER PRESENTATION Algeria Accepted
Investigation of fillet radius effect at the connection location between a pipe and cylindrical fluid tank and addition of reinforcement
ORAL PRESENTATION Turkey Accepted
STATISTICAL ANALYSIS OF TOOL LIFE AND SURFACE ROUGHNESS USING RESPONSE SURFACE METHODOLOGY IN FACE MILLING OF AISI 52100 BEARING STEEL WITH MULTILAYER COATING CUTTING TOOL.
POSTER PRESENTATION Algeria Accepted
Implementation of a longitudinal support bar into a medium thickness aluminium pressured vessel
ORAL PRESENTATION Turkey Accepted
Evaluating of The How Turbulent Flow Effects On Heat Transfer Efficiency in A Wind Catcher
ORAL PRESENTATION Iran Accepted
Experimental Investigation of the Effect of Screen Meshes on Longitudinal Turbulence in BURET Wind Tunnel
ORAL PRESENTATION Turkey Accepted
Influence of micropolar lubricant on the dynamic behaviour of a rigid rotor mounted on four-pad hydrostatic squeeze film dampers
ORAL PRESENTATION Algeria Accepted
Experimental investigation and parameter optimization of abrasive water jet machining
ORAL PRESENTATION India Accepted
Ab-initio Calculations of Rhodium Based Alloys Electronic and Thermodynamic Properties
POSTER PRESENTATION Algeria Accepted
Optimization of Cutting Parameters in CO2 Laser Beam Machining of Buffalo Leather Using Genetic Algorithm
ORAL PRESENTATION India Accepted
Nuclear Energy and Spent Nuclear Fuel Management
ORAL PRESENTATION Algeria Accepted
A DISCUSSION ON THE RECENT ADVANCES AND THE POSSIBLE FUTURE USE OF SOLAR ENERGY AND CSP HYBRID SYSTEMS IN TURKEY
ORAL PRESENTATION Turkey Accepted
HIGH TEMPERATURE TRIBOLOGICAL CHARACTERISATION OF TiAlSiN COATINGS PRODUCED BY CATHODIC ARC EVAPORATION
ORAL PRESENTATION Turkey Accepted
HIGH CONTACT RATIO GEAR GEOMETRY OPTIMIZATION BY AN ADVANCED COMPOSITE DIFFERENTIAL EVOLUTION ALGORITHM
POSTER PRESENTATION Algeria Accepted
EXPERIMENTAL STUDY OF THE MECHANICAL BEHAVIOR OF SOILS USED IN SEALING COVERAGE OF WASTE STORAGE FACILITIES
POSTER PRESENTATION Turkey Accepted
EFFECT OF MANUFACTURING TOLERANCES ON THE KINEMATIC PERFORMANCE OF PLANAR MECHANISMS
POSTER PRESENTATION Algeria Accepted
Preparation and Characterization of Nanocellulose-PVA-Sodium Alginate Membranes for Dehydration of Aqueous Organic Mixtures
POSTER PRESENTATION Turkey Accepted
THE EFFECTS OF MARBLE DUSTS ON DIFFERENT DIMENSIONS ON PHOTOVOLTAIC PANEL
ORAL PRESENTATION Turkey Accepted
MODELING OF A HYBRID PHOTOVOLTAIC/THERMAL ZnO-WATER NANOFLUID BASED COLLECTOR
POSTER PRESENTATION Turkey Accepted
Study of thermomechanical behavior of lubricating oils
POSTER PRESENTATION Algeria Under Review
Research on Wing Selection of an Unmanned Aerial Vehicle with using CFD Analysis
ORAL PRESENTATION Turkey Accepted
NONLINEAR LARGE ANGLE SOLUTION OF BLADE ELEMENT MOMENTUM THEORY FOR MARINE PROPELLERS
Turkey Accepted
NUMERICAL AND MATHEMATICAL MODEL OF HUMAN MILK FLOW IN BREAST PUMP
ORAL PRESENTATION Turkey Accepted
Numerical study on the effect of geometry of solar chimney power plant on the performance of turbine
ORAL PRESENTATION Iran Accepted
NUMERICAL AND EXPERIMENTAL INVESTIGATION OF THERMAL BRIDGE FORMATION IN AIR HANDLING UNITS
ORAL PRESENTATION Turkey Accepted
The effect of energy and mass balance constraints on the design optimization of an auto-thermal ammonia synthesis Reactor
POSTER PRESENTATION Algeria Accepted
ANALYSIS OF DRILLING PARAMETERS ON HYBRID METAL MATRIX COMPOSITES USING RSM
ORAL PRESENTATION India Accepted
Systematic Construction of a Breast Pump
ORAL PRESENTATION Turkey Accepted
Hot-air Drying Apricots (Hacihaliloglu): Effect of Pre-treatments on Drying Kinetics
ORAL PRESENTATION Turkey Accepted
REDUCTION OF CYCLE TIME AND WARPAGE IN INJECTION MOLDING OF THIN WALLED POLYPROPYLENE BASED PRODUCT
POSTER PRESENTATION Turkey Under Review
Characterizing the convection heat transfer and flow field at the stator end-windings
ORAL PRESENTATION Iran Accepted
Heat transfer enhancement of sinusoidal mini-channel heat sink using MgO nanofluid
ORAL PRESENTATION Pakistan Accepted
Effect of fins insertion inside PCM for passive cooling of photovoltaic panels
ORAL PRESENTATION Pakistan Accepted
RECYCLING AND EVALUATION OF PRECIOUS METAL FROM BORON CLAYS
POSTER PRESENTATION Turkey Accepted
Hybrid nanofluids: Techniques and challenges of stability enhancement
ORAL PRESENTATION Pakistan Accepted
Hot-air Drying and Colour Characteristics of Ginger Slices
POSTER PRESENTATION Turkey Accepted
Square wave determination of Cu (II) by Myrtle Tannin-Chitosan-Tripolyphosphate nanoparticles modified multi-walled carbon nanotubes electrode.
POSTER PRESENTATION Algeria Accepted
Gear fault detection using instantaneous angular speed and EEMD in non-stationary conditions
POSTER PRESENTATION Algeria Accepted
ELECTRONIC BANDGAPS OF GALLIUM-ZINC OXYNITRIDE
POSTER PRESENTATION Algeria Accepted
Microstructural Study After Annealing of Equal Channel Angular pressed Aluminuim
POSTER PRESENTATION Algeria Accepted
A new cubic phase of GaZnNO for water splitting
POSTER PRESENTATION Algeria Accepted
Magnetic field effect on nanoparticles dispersion during the mixed convection of Newtonian nanofluid in a ventilated trapezoidal cavity: Buongiorno’s mathematical model
POSTER PRESENTATION Algeria Accepted
ENHACEMENT OF DYNAMIC CHARACTERISTIC RESPONSE OF FG-CNT REINFORCED COMPOSITE BEAMS WITH TEMPERATURE-DEPENDENT MATERIAL PROPERTIES
POSTER PRESENTATION Algeria Accepted
THEORETICAL AND EXPERIMENTAL STUDY OF Cu2ZnSnS4 COMPOUND FOR SOLAR CELLS
POSTER PRESENTATION Algeria Accepted
ANALYSIS INVESTIGATION OF VERY HIGH IGBTS UNDER ZCS SOFT SWITCHING CONDITIONS
ORAL PRESENTATION Algeria Accepted
EFFECT OF THERMAL STRESS AND ZVS CONDITIONS ON HV IGBTS PERFORMANCE
ORAL PRESENTATION Algeria Accepted
PERFORMANCE AND ECONOMIC ANALYSIS OF THE REFRIGERATION SYSTEMS IN SHIPS: A CASE STUDY
ORAL PRESENTATION Turkey Accepted
Removal of Basic Red 46 dye from aqueous solution by adsorption and photocatalysis: Optimum conditions, equilibrium and kinetic studies
ORAL PRESENTATION Oman Accepted
MEASUREMENT UNCERTAINTY ON A GEOMETRICAL SPECIFICATION IN THREE-DIMENSIONAL MEASUREMENT
POSTER PRESENTATION Algeria Accepted
MEASUREMENT UNCERTAINTY ON A GEOMETRICAL SPECIFICATION IN THREE-DIMENSIONAL MEASUREMENT
Algeria Accepted
Free Stream line Model for a Pouring Flow
POSTER PRESENTATION Algeria Accepted
MEASUREMENT UNCERTAINTY ON A GEOMETRICAL SPECIFICATION IN THREE-DIMENSIONAL MEASUREMENT
POSTER PRESENTATION Algeria Accepted
Study of the structural, mechanical and electronic properties of ternary semiconductors
POSTER PRESENTATION Algeria Accepted
using solar energy for storing energy in batteries.
ORAL PRESENTATION Iraq Accepted
Experimental and Analysis in Abrasive Water jet Cutting of carbon fiber reinforced plastics using Response Surface Methodology
ORAL PRESENTATION Tunisia Accepted
Elaboration of mullite refractory bricks from Algerian Kaolin’s
POSTER PRESENTATION Turkey Accepted
Sustainable Manufacturing Approach by Using MQL System in AISI D2 Milling
ORAL PRESENTATION Turkey Accepted
Ritz’s method in the analysis of the deflections’ plates
ORAL PRESENTATION Algeria Accepted
INVESTIGATION OF THE DYNAMIC BEHAVIOUR OF A LASER SPOT WELDED STRUCTURE USING FINITE ELEMENT MODEL UPDATING
ORAL PRESENTATION Malaysia Accepted
WEAR BEHAVIOR OF Ti6Al4V ALLOY COATED Ti/TiN/TiO2 PVD THIN FILMS AGAINST BOVINE BONE
ORAL PRESENTATION Algeria Accepted
Ab initio study of the structural and mechanical properties of MgNi3 intermetallic compound
POSTER PRESENTATION Turkey Accepted
Ab initio investigation of mechanical properties of MgCuAl2 ternary intermetallic compound
POSTER PRESENTATION Turkey Accepted
NUMERICAL SIMULATIONS APPLIED TO ENERGY EFFICIENCY FOR BUILDINGS WITH LATTICE BOLTZMANN METHOD
POSTER PRESENTATION Algeria Accepted
Direct red 81 sorption on green alga Ulva lactuca.
POSTER PRESENTATION Algeria Accepted
The effect of flour surface treatments on the tensile and water sorption properties of polypropylene/wood flour composites
POSTER PRESENTATION Turkey Accepted
INTEGRATION OF A SOLAR COOLING AND HEATING SYSTEM IN RESIDENTIAL BUILDING LOCATED IN ALGERIA
POSTER PRESENTATION Algeria Accepted
THE EFFECT OF ARGON GAS ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AUSTENITIC STAINLESS STEEL PRODUCED BY SELECTIVE LASER MELTING (SLM)
ORAL PRESENTATION Malaysia Accepted
NATURAL AGEING AND REPROCESSING OF AGED POLYCARBONATE
ORAL PRESENTATION Turkey Accepted
EFFECT OF UV AGEING ON MECHANICAL, RHEOLOGICAL AND MORPHOLOGICAL PROPERTIES OF POLYCARBONATE
ORAL PRESENTATION Turkey Accepted
EXPERIMENTAL AND NUMERICAL ANALYSIS OF A PASSIVE SYSTEM USING SOLAR CHIMNEY.
ORAL PRESENTATION Algeria Accepted
THE ASSESSMENT OF THE SOUND ENVIRONMENT IN THE WORKPLACE: A LEVER FOR WORK QUALITY AND SAFETY
ORAL PRESENTATION Algeria Accepted
Modeling a 3D structure for acoustic filtering
POSTER PRESENTATION Algeria Accepted
Phononic cavity modes in a Structured Micro-Guide
POSTER PRESENTATION Algeria Accepted
Experimental study for the determination of the contact temperature between the cutting tool and the work piece during the application of the milling process
POSTER PRESENTATION Algeria Accepted
Investigation of Springback Parametres for Vehicle Body Part In Sheet Metal Shapıng Process
POSTER PRESENTATION Turkey Under Review
Construction of an Advanced Performance Indicator System Health, Safety by the ECO-GRAI method: case of NAFTAL-CBR-BATNA-ALGERIA
POSTER PRESENTATION Algeria Under Review
Robust Finite Time Control for Power Systems
POSTER PRESENTATION Algeria Accepted
Theoretical Investigation on lanthanide complexes
POSTER PRESENTATION Algeria Under Review
EFFECT OF CARBOXYMETHYL CELLULOSE ON THE THEOLOGICAL PROPRETIES OF BENTONITE SUSPENSION
POSTER PRESENTATION Algeria Accepted
BONDING ANALYSIS AND electronic structure of transition metal–benzoquinoline complexes: A theoretical study
POSTER PRESENTATION Algeria Accepted
RHEOLOGICAL STUDY OF CARBOXYMETHYL CELLULOSE: EFFECT OF CONCENTRATION AND MOLECULAR WEIGHT
POSTER PRESENTATION Algeria Accepted
Thermal, morphological and dynamical mechanical properties of HDPE/HGS/MMT Nanocomposites
ORAL PRESENTATION Turkey Accepted
EXPERIMENTAL STUDY OF TEMPERATURE INFLUENCE ON THE ELECTRICAL PERFORMANCE OF POLYCRYSTALLINE PHOTOVOLTAIC CELL
POSTER PRESENTATION Turkey Accepted
Comparative Analysis of the Tribological Behavior of Copper-Steel and Brass-Steel Dynamic Contacts
POSTER PRESENTATION Algeria Accepted
STUDY OF THE SURFACE ROUGHNESS AND THE CUTTING FORCE IN THE TURNING OF THE PTFE
POSTER PRESENTATION Algeria Accepted
LOSSY INDUCTANCE SIMULATOR REALIZATION BY USING CURRENT FOLLOWER TRANSCONDUCTANCE AMPLIFIER (CFTA)
ORAL PRESENTATION Turkey Accepted
Computational Fluid Dynamics (CFD) modelling of heat transfer performance of nanofluids
POSTER PRESENTATION Algeria Accepted
WIND ENERGY IN THE WORLD AND RECENT DEVELOPMENTS IN PERFORMANCE ANALYSIS OF WIND TURBINES
ORAL PRESENTATION Turkey Accepted
BIOLOGICAL ACTIVITIES OF TWO OLEORESINS
Turkey Accepted
THE EFFECT OF SINTERING CONDITION AND COMPOSITE ON THE SUPERCONDUCTING AND MICROSTUCTURAL PROPERTIES OF Bi-Sr-Cu-Ca-O
POSTER PRESENTATION Algeria Accepted
Convective heat and mass transfers in a ceramic material
POSTER PRESENTATION Algeria Accepted
DESIGN AND MODELING OF MAGNETICALLY LEVITATED HOVERBOARD
ORAL PRESENTATION Turkey Accepted
Effect of Vegetable Oil Used in MQL System on Surface Roughness in Hard Milling Process
ORAL PRESENTATION Turkey Accepted
Effectiveness of two corrosion inhibitors on carbon steel
POSTER PRESENTATION Algeria Accepted
Pool Boiling Heat Transfer and Bubble Dynamics on Coated Surfaces
ORAL PRESENTATION India Accepted
EXPERIMENTAL STUDY FOR DETECTION OF DUCTILE FRACTURE IN WELDMENTS
POSTER PRESENTATION Algeria Accepted
Magneto-Hydrodynamics (MHD) effects on natural convection heat transfer and entropy generation in an enclosure with heated block inside
ORAL PRESENTATION Tunisia Accepted
Design & Numerical simulation of supersonic compressible flow Application into propulsive nozzles with liquid combustible H2O2 for the spatial application
POSTER PRESENTATION Algeria Accepted
Mathematical Modeling and Calculation of Wind Energy Potential Using Measured Values for a Specific Area
ORAL PRESENTATION Iran Accepted
Numerical Investigation of Canal Effect on Ship Resistance in Model Scale
ORAL PRESENTATION Turkey Accepted
ANGULAR VELOCİTY CONTROL OF A TWO-DEGREES-OF-FREEDOOM FLEXİBLE BELT DRİVEN SYSTEM USİNG I-PD AND SSI CONTROLLERS
ORAL PRESENTATION Turkey Accepted
Elaboration of a thermoplastic "POLYPROPYLENE" charged with kaolin
POSTER PRESENTATION Algeria Accepted
Linear dynamic behavior of a rigid rotor supported by three-pad hydrostatic squeeze film dampers compensated with electrorheological valves restrictors
ORAL PRESENTATION Algeria Accepted
IMPROVEMENT OF SUB-PLATFORM REINFORCEMENT PARTS USED IN UNDER VEHICLE LIGHTENING STUDIES
POSTER PRESENTATION Turkey Accepted
EFFECT OF GURNEY FLAP ON THE AERODYNAMIC PERFORMANCE OF NACA 001 AIRFOIL AT LOW REYNOLDS NUMBER
ORAL PRESENTATION Turkey Accepted
nanotechnology and environment. An overview
ORAL PRESENTATION Algeria Accepted
STUDY OF FREE VIBRATIONS OF GEARBOXE BY THE FINITE ELEMENT METHOD
POSTER PRESENTATION Algeria Accepted
Application of Peleg Model on Swelling of Mussels Dried with Infrared Method
ORAL PRESENTATION Turkey Accepted
THE STUDY OF BULK ULTRASONIC WAVE PROPAGATION IN SOLID POLYMERS
POSTER PRESENTATION Algeria Accepted
IMPROVEMENT OF THE MECHANICAL PROPERTIES OF CUTTING TOOLS, BY HEAT TREATMENT
POSTER PRESENTATION Algeria Accepted
Integration of Phase Change Materials in Traditional Building for Cooling Purposes under Desert Climate
POSTER PRESENTATION Algeria Accepted
Analysis of the surface roughness using 2D and 3D functional parameters in machining of cast iron by uncoated and PVD coated silicon nitride ceramic tools
POSTER PRESENTATION Algeria Under Review
Synthesis of thin films of ZnO by vacuum evaporation and study of the effect of thermal oxidation on their structural, optical and electrical properties
POSTER PRESENTATION Algeria Accepted
Application of Foam Extrusion to Enhance the Properties of Polypropylene/Montmorillonite Nanocomposites
POSTER PRESENTATION Turkey Accepted
Mechanical Behavior of A Swelling Soil By Adding Crushed Polymer Waste Type PVC
POSTER PRESENTATION Algeria Accepted
EFFECT OF b-LACTOGLOBULIN CONCENTRATION ON FOULING DURING MILK HEAT TREATMENT
POSTER PRESENTATION Algeria Accepted
Drying Kinetics of Pea in an Infrared Dryer
ORAL PRESENTATION Turkey Accepted
A REVIEW ON HEAT TRANSFER ENHANCMENT WITH CONSTRUCTAL THEORY
ORAL PRESENTATION Turkey Accepted
Nonlinear stability analysis of thin-walled box beam.
POSTER PRESENTATION Algeria Under Review
COMPARATIVE STUDY BETWEEN THE BEHAVIOR OF HDPE 100 AND HDPE 80
POSTER PRESENTATION Algeria Accepted
Effect of alkaline treatment and oxidants on the fiber structure and the mechanical properties of Luffa- polyester composite
POSTER PRESENTATION Algeria Accepted
Effect of alkaline treatment and oxidants on the fiber structure and the mechanical properties of Luffa- polyester composite
POSTER PRESENTATION Algeria Accepted
Effect of Al13 polycation grafting on the porous structure development of banana wastes activated carbon
POSTER PRESENTATION Turkey Accepted
Numerical study of electrostatic sheath behavior in plasma discharge
POSTER PRESENTATION Algeria Accepted
EXPERIMENTAL INVESTIGATION OF DATE PALM LEAFLETS AND THEIR COMPOSITE UNDER TENSILE LOADING
POSTER PRESENTATION Afghanistan Accepted
FIRST PRINCIPLES STUDY OF GASB1-XBIX : STRUCTURAL, ELECTRONIC AND THERMAL PROPERTIES
POSTER PRESENTATION Algeria Accepted
AB INITIO STUDY OF STRUCTURAL, ELECTRONIC AND THERMAL PROPERTIES OF ALP1−X BIX IN ZINC-BLEND STRUCTURES
POSTER PRESENTATION Algeria Accepted
Dynamic response of a multi-span, orthotropic bridge deck Under moving truck loading with tandem axles
Algeria Accepted
Determination of drying kinetics, effective moisture diffusivity and activation energy in infrared drying of pear slices
ORAL PRESENTATION Turkey Accepted
ELECTROCHEMICAL STUDY OF AN AZOMETHINE ON CARBON STEEL IN ACID CHLORIDRIC MEDIA.
POSTER PRESENTATION Algeria Accepted
Study of the thermal behavior of a microprocessor by infrared thermography
POSTER PRESENTATION Algeria Accepted
FLOW INDUCED NOISE OF A SUBMARINE WITH PROPELLER
ORAL PRESENTATION Turkey Accepted
EFFECT OF DEEP ROLLING PROCESS ON THE FATIGUE PERFORMANCE OF TIE-ROD COMPONENT
ORAL PRESENTATION Turkey Accepted
Study of combined natural convection-radiation with internal heat generation in absorbing and emitting medium
POSTER PRESENTATION Algeria Accepted
THERMAL EFFECT ON BUCKLING OF MICRO BEAMS USING MODIFIED COUPLE-STRESS THEORY
POSTER PRESENTATION Anguilla Accepted
Microstructural Properties of the Bulk (NiO)x Bi1.6Pb0.4Sr2CaCu2O8+δ
POSTER PRESENTATION Algeria Accepted
Removal capacity and adsorption mechanism of a clay and bentonite for a textile dye
POSTER PRESENTATION Algeria Accepted
Study of the mechanical behavior of a clay-based materials of M’sila region reinforced by Palm fibres
POSTER PRESENTATION Algeria Accepted
Design and characterization of silicon resonant micromembranes with piezoelectric actuation and integrated piezoresistive detection applied to the detection of biological agents
ORAL PRESENTATION Algeria Accepted
COMPARATIVE STUDY BETWEEN TWO OBSTACLES MODELS IN THE THREE-DIMENSIONAL TURBULENT FLOW: PRISMATIC AND CUBIC OBSTACLES
POSTER PRESENTATION Algeria Accepted
NUMERICAL SOLUTIONS OF BIFURCATION IN LAMINAR MIXED CONVECTION FLOW IN A VERTICAL CHANNEL
POSTER PRESENTATION Algeria Accepted
Nonlinear Dynamics of 2D Geometrically Exact Beam using an implicit temporal integration scheme
ORAL PRESENTATION Algeria Accepted
INFLUENCE OF THE REYNOLDS NUMBER OF A FLOW AROUND OBSTACLE WITH ROUNDED DOWNSTREAM EDGE
POSTER PRESENTATION Algeria Accepted
ELABORATION AND CHARACTERIZATIONS OF ZnO THIN FILMS
POSTER PRESENTATION Algeria Accepted
THIN LAYER DRYING OF CHICKEN MEAT: MODELING AND EXPERIMENTAL RESULTS
ORAL PRESENTATION Turkey Accepted
Effect of chemical treatment on the mechanical properties of Commingled Alfa–Jute fabric composites
POSTER PRESENTATION Algeria Accepted
Lateral Aspect Ratio Effects on Parallel Flow Elongated Porous Domain Subjected to Cross Heat and Mass Flux
POSTER PRESENTATION Algeria Accepted
Studies on potential applications of biomass for the separation of methylene blue from wastewater
POSTER PRESENTATION Algeria Accepted
Friction and wear behaviour of WC-Co implanted with nitrogen ions
POSTER PRESENTATION Algeria Accepted
Implementation of model-based adaptive controller on vehicle active suspension systems
ORAL PRESENTATION Turkey Accepted
COOLING TECHNOLOGY AND THERMODYNAMIC APPLICATIONS FOR FOOD PRESERVATION
POSTER PRESENTATION Turkey Accepted
COMPRATIVE ANALYSIS OF WEAR EVOLUTION OF HSS HELICAL DRILLS CUTTING EDGES DURING THE MACHINING OF HARDENED AND UNHARDENED C22 STEEL TO DETERMINE THE LIFETIME CRITERION
POSTER PRESENTATION Algeria Accepted
ALKALI TREATMENT EFFECTS ON THE PHYSICO-CHEMICAL AND THERMAL CHARACTERISTICS OF ALFA FIBERS
POSTER PRESENTATION Algeria Accepted
EXPERIMENTAL STUDY OF THE MECANICAL BEHAVIOUR OF POLYMER CONCRETES UNDER 3-POINT BENDING LOADING
Algeria Accepted
THERMAL BEHAVIOR AND MORPHOLOGICAL ANALYSIS OF DATE PALM FIBER (PHOENIX DACTYLIFERA L.)
POSTER PRESENTATION Algeria Accepted
THE INHIBITIVE EFFECT OF A NEWLY SYNTHESIZED SCHIFF BASE ON CORROSION BEHAVIOUR OF MILD STEEL IN HYDROCHLORIC ACID SOLUTION
POSTER PRESENTATION Algeria Accepted
Mechanical behavior of a new cellular structure
POSTER PRESENTATION Afghanistan Accepted
Nonlinear stability analysis of Web Tapered Thin-Walled I Beams
POSTER PRESENTATION Algeria Accepted
Simulation of Paraffin Deposit with Inhibitors in Petroleum Installations
POSTER PRESENTATION Algeria Accepted
Characterization of a Bacterial Biofilm on a carbon steel
POSTER PRESENTATION Algeria Accepted
SIMULTANEOUSLY DMA /IMPEDANCE SPECTROSCOPY AND DSC CHARACTERIZATIONS OF CURRING PREPREG BASED EPOXY RTM6 THERMOSET COMPOSITE
POSTER PRESENTATION Algeria Accepted
FLEXURAL BEHAVIOR OF ALUMINUM SANDWICH PANEL WITH PVC FOAM CORE
ORAL PRESENTATION Turkey Accepted
THE EFFECT OF AXIAL AND RADIAL GRID RESOLUTION ENHANCEMENT ON THE ACCURACY OF NUMERICAL METHOD FOR SIMULATION OF A BUBBLE COLUMN
ORAL PRESENTATION Iran Accepted
Different flow channels and different material membrane production in PEM fuel cell
ORAL PRESENTATION Turkey Accepted
photodegradation of anionic dye under visible irradiation in the presence of BiOX
POSTER PRESENTATION Algeria Accepted
the influence of additives on the cement paste in isothermal analysis
POSTER PRESENTATION Algeria Under Review
COMPARATIVE ANALYSIS OF FLANK WEAR IN HARD TURNING USING RSM AND ANN METHODS
POSTER PRESENTATION Afghanistan Accepted
NON-LINEAR ANALYSIS FOR REPAIRED CRACK WITH A TGM COMPOSITE UNDER MIXED MODE FRACTURE OF AIRCRAFT STRUCTURES
ORAL PRESENTATION Algeria Accepted
AN INVESTIGATION ON INTERFACIAL STRESS DISTRIBUTION OF FUNCTIONALLY GRADED BEAMS REPAIRED WITH A BONDED HYGROTHERMAL AGED COMPOSITE PLATE
POSTER PRESENTATION Algeria Accepted
Performance comparison of Multilayer Perceptron and Radial Basis Function Networks for classification of hand motions
ORAL PRESENTATION Turkey Accepted
Study of the evolution of the F.I.C Under the Effect of Residual Constraints
POSTER PRESENTATION Algeria Accepted
IMPULSE PRESSURE ASSISTED DIFFUSION BONDING OF AISI 304 AUSTENITIC STAINLESS STEEL AT DIFFERENT BONDING TEMPERATURES
ORAL PRESENTATION India Accepted
SUPERPARAMAGNETIC NANOPARTICLE MODIFIED WITH THIOGLYCOLIC ACID AND PILLAR[5]ARENE
ORAL PRESENTATION Turkey Accepted
A NEW PILLAR[5]ARENE/NANOPARTICLE SYSTEM FUCTIONALIZED WITH 3-AMINOPROPYLTRIETHOXYSILANE
ORAL PRESENTATION Turkey Accepted
PREPARATION AND CHARACTERIZATION OF THE SPINEL NiCo2O4 AS PHOTOCATALYST IN THE BASIC BLUE 41 DYE DEGRADATION
POSTER PRESENTATION Oman Accepted
VIBRATORY STUDY OF GEAR TRANSMISSIONS
POSTER PRESENTATION Algeria Accepted
STUDY OF FREE VIBRATIONS OF GEARBOXE BY THE FINITE ELEMENT METHOD
Algeria Accepted
OPTIMISATION OF PHASED ARRAY ULTASONIC TRANSDUCERS FOR DETECTION OF TRANSVERSE FLAWS IN RAILWAYS
ORAL PRESENTATION Turkey Accepted
Fabrication of Aluminum-Pumice Syntactic Foam and Determination of Its Compressive Behavior
ORAL PRESENTATION Turkey Accepted
COMPUTER ANALYSIS AND MODELLING OF CONFINED TURBULENT RECIRCULATING FLOWS
ORAL PRESENTATION Turkey Accepted
Formation of the structure and mechanical behavior of Austempered ductile iron under the effect of alloying elements
POSTER PRESENTATION Algeria Accepted
Implementation of an automated maintenance management system: Case of an Algerian company
POSTER PRESENTATION Algeria Accepted
An experimental technique for the in-situ measurement of temperature fields for the orthogonal cutting
ORAL PRESENTATION Algeria Accepted
Mathematical formulation of complex multibody industrial systems.
ORAL PRESENTATION Qatar Accepted
EFFECTS OF SEBS POLYMER MODIFICATION ON THE CHARACTERISTICS OF BITUMEN
ORAL PRESENTATION Algeria Accepted
Plant microbial fuel "Lillium perenne, a grass P-MFC to generate a green electricity"
POSTER PRESENTATION Turkey Accepted
Performance and exhaust emissions characteristics investigation using B10 from bitter apple biodiesel in DI diesel engine
ORAL PRESENTATION Algeria Accepted
PIV Measurement and Analysis of Flow Fields for Wind Turbine’s Diffuser Models with Different Flange Angles
POSTER PRESENTATION Egypt Accepted
Numerical test of flattening compared to the experimental
ORAL PRESENTATION Algeria Accepted
Influence of nitrogen flow rate on the structural, morphological and optical properties of DC magnetron sputtered TaN thin films
POSTER PRESENTATION Algeria Accepted
ENHANCEMENT OF HEAT TRANSFER FORCED-CONVECTION COOLING OF MULTIPLE HEATED USING POROUS BLOCKS IN A CHANNEL.
POSTER PRESENTATION Algeria Accepted
RELIABILITY ANALYSIS COMPARISON FOR HDPE PIPES BASED ON SLOW CRACK GROWTH AND CRITICAL STRESS INTENSITY FACTOR MODELS
ORAL PRESENTATION Algeria Accepted
Formation of the structure and mechanical behavior of Austempered ductile iron under the effect of alloying elements
POSTER PRESENTATION Algeria Under Review
EXPERIMENTAL STUDY OF THE TECHNICAL CHARACTERISTICS OF THE LOW THICKNESS ALUMINIUM 2024 BY THE PROCESS (TIG) TUNGSTEN INERT GAS
POSTER PRESENTATION Algeria Accepted
COMPUTATION OF THE J-INTEGRAL FOR REPAIRED CRACKS WITH BONDED COMPOSITE (CARBON-EPOXY) WRAP IN THE API X65 PIPELINE
POSTER PRESENTATION Algeria Under Review
Overpressure Risk Mitigation with SCADA in a Natural Gas Distribution System
POSTER PRESENTATION Algeria Accepted
MODELING A CONTROL SYSTEM OF A MPPT PV / WIND POWER HYBRID SYSTEM
POSTER PRESENTATION Turkey Accepted
NUMERICAL INVESTIGATION OF CORRUGATED DOUBLE PIPE HEAT EXCHANGER IN TURBULENT FLOW
ORAL PRESENTATION Iran Accepted
MODELING A CONTROL SYSTEM OF A MPPT PV / WIND POWER HYBRID SYSTEM
MODELING A CONTROL SYSTEM OF A MPPT PV / WIND POWER HYBRID SYSTEM
POSTER PRESENTATION Turkey Accepted
MODELING A CONTROL SYSTEM OF A MPPT PV / WIND POWER HYBRID SYSTEM
MODELING A CONTROL SYSTEM OF A MPPT PV / WIND POWER HYBRID SYSTEM
POSTER PRESENTATION Turkey Accepted
Modelling and optimization of the cutting conditions in hard turning of X210Cr12 Steel using ANN and desirability approach
POSTER PRESENTATION Afghanistan Accepted
Application of the RSM approach for the modeling of cutting conditions cutting conditions in hard turning of X210Cr12 Steel
POSTER PRESENTATION Afghanistan Accepted
Improved hot corrosion resistance of air plasma sprayed thermal barrier coatings on Inconel X750 alloy by TiN-modified ‘bondcoat’.
ORAL PRESENTATION Pakistan Accepted
Labview Design of an Automatic Data Acquisition System for Schottky Diodes Thermoelectric Characterization
POSTER PRESENTATION Algeria Accepted
THE PREPARATION OF SUPER MAGNETIC IRON OXIDE NANOPARTICLE BASED ON PILLAR[5]ARENE
ORAL PRESENTATION Turkey Accepted
CHARACTERISATION OF STAINLESS STEEL PROTECTIVE COATINGS DEPOSITED BY THERMAL EVAPORATION
POSTER PRESENTATION Algeria Accepted
Hydrothermal synthesis and molecular optimization for new materials
POSTER PRESENTATION Algeria Accepted
Synthesis, Characterization and Thermal Stability of organometallic Complexes. Optical Data Storage applications.
POSTER PRESENTATION Algeria Accepted
EFFECT OF WELDING CURRENT ON MECHANICAL PROPERTIES AND MICROSTRUCTURE OF TIG WELDING OF TYPE-304 AUSTENITE STAINLESS STEEL
ORAL PRESENTATION South Africa Accepted
COMPARATIVE STUDY BETWEEN TIG AND MIG WELDING PROCESSES
ORAL PRESENTATION South Africa Accepted
AN EXPERIMENTAL STUDY ON THE EFFECT OF HEAT INPUT ON THE WELD EFFICIENCY OF TIG- MIG HYBRID WELDING OF TYPE-304 AUSTENITIC STAINLESS STEEL
ORAL PRESENTATION South Africa Accepted
ANALYTICAL SOLUTION FOR THE THERMOMECHANICAL BENDING RESPONSE OF FUNCTIONALLY GRADED RECTANGULAR PLATES USING A REFINED PLATE THEORY
POSTER PRESENTATION Algeria Accepted
Thermal Performance Analysis of Solar Water Heating System In TRNSYS Under Various Climate Conditions
ORAL PRESENTATION Pakistan Accepted
NUMERICAL INVESTIGATION OF HEAT TRANSFER AND PRESSURE DROP IN A TUBE FITTET WITH SWIRLING FLOW DEVICES
ORAL PRESENTATION Iran Accepted
DESIGN AND CONTROL OF AN UNMANNED AERIAL VEHICLE TO EXTEND FLIGHT TIME USING WIND POWER
ORAL PRESENTATION Turkey Accepted
Assessment of heavymetal pollution from dental clinics
POSTER PRESENTATION Algeria Accepted
Fire and explosion risks assessment using HAZID and F&EI methods, case of the GL1K-Skikda natural gaz plant
POSTER PRESENTATION Algeria Accepted
Quantitative risk analysis: Case of LPG Constantine - Algeria
ORAL PRESENTATION Algeria Accepted
AN EXPERIMENTAL STUDY OF NUSSELT AND REYNOLDS NUMBERS CORRELATIONS FOR DETERMINATION OF CONVECTIVE HEAT TRANSFER COEFFICENTS ON QUENCHING MONOFILAMENT
ORAL PRESENTATION Turkey Accepted
Catalytic activity of maghemite nanoparticles as an heterogeneous Fenton-like process.
POSTER PRESENTATION Algeria Accepted
Experimental Method for Measuring of Sound Pressure Levels in Anechoic Chamber and a Noisy Environment
ORAL PRESENTATION Jordan Accepted
Comparison of various refined nonlocal beam theories for bending, vibration and buckling analysis of nanobeams
POSTER PRESENTATION Turkey Accepted
Tribological Properties of (Ni,Nb and V) inoculated High-Manganese Steel
POSTER PRESENTATION Algeria Under Review
The thermal impact of the panel tilt angle on performance of PV cell using PCM
POSTER PRESENTATION Algeria Accepted
EFFECT OF HEAT TREATMENT ON CHANGE MICROSTRUCTURE AND HARDNESS OF CR-NI ALLOYED HADFIELD STEEL
POSTER PRESENTATION Algeria Accepted
EFFECT OF VANADIUM AND MOLYBDENUM ON WEAR RESISTANCE OF HIGH MANGANESE STEEL
POSTER PRESENTATION Algeria Accepted
THE APPROPRIATE GENETIC ALGORITHM OPERATORS (CROSSOVER AND MUTATION) USED IN SHOP SCHEDULING PROBLEMS
ORAL PRESENTATION Jordan Accepted
Wear behavior of rapidly solidified NiCrBSi coatings deposited by plasma spraying
ORAL PRESENTATION Anguilla Accepted
Agricultural Biomass Energy Potential for Adana, Turkey
ORAL PRESENTATION Turkey Accepted
INFLUENCE OF FUEL INLET VELOCITY ON STEAM METHANE REFORMING PROCESS FOR HYDROGEN PRODUCTION
POSTER PRESENTATION Algeria Accepted
THERMODYNAMIC AND PHONON PROPERTIES OF KZnP COMPOUND
POSTER PRESENTATION Algeria Accepted
Factors Militating Against the Development of Blacksmithing In Some Selected States of North West Geopolitical Zone Of Nigeria
ORAL PRESENTATION Nigeria Under Review
THEORETICAL AND EXPERIMENTAL STUDY OF A FAN AND AXIAL BURNER
POSTER PRESENTATION Turkey Accepted
Vibrational Diagnostics of an atomizer fan
ORAL PRESENTATION Turkey Accepted
Quenching: an improvement factor of HSS twist drill tool-life when machining C18 steel
POSTER PRESENTATION Algeria Accepted
EFFECT OF PROPELLER GEOMETRY ON NOISE EMISSION IN MARINE APPLICATIONS
ORAL PRESENTATION Turkey Accepted
EVALUATION OF CLASSIFIER MODELS FOR THE DETECTION OF DIABETES DISEASE
ORAL PRESENTATION Nigeria Under Review
INVESTIGATION OF NANOPARTICLE TYPE IN TWO-PHASE FLOW IN MICRO-SCALE
ORAL PRESENTATION Turkey Accepted
EFFECT OF NANOPARTICLE CONCENTRATION ON FLOW BOILING HEAT TRANSFER IN MICRO-SCALE
ORAL PRESENTATION Turkey Accepted
Thermal Design and testing of mini-scaled heat sink for 400 W thermoelectric generator driven by exhaust-gas from vehicle engine
POSTER PRESENTATION Lebanon Accepted
Two-Dimensional Materials for High-Efficient Electromagnetic Interference Shielding
ORAL PRESENTATION Turkey Accepted
THE EFFECT OF SOLAR STEAM HARDENING ON CONCRETE FOR PREFABRICATED BUILDINGS
ORAL PRESENTATION Algeria Accepted
A Model of Repetitive Noise Superposition
ORAL PRESENTATION Pakistan Accepted
STRUCTURAL AND MECHANICAL PROPERTIES OF TERNARY PNICTIDE KZNP
POSTER PRESENTATION Algeria Accepted
Elaboration and characterization of (PbO2+Graphene) composite for energy storage application
POSTER PRESENTATION Algeria Accepted
Numerical study of the Double Mach reflection using shock-capturing with sub-cell accuracy
POSTER PRESENTATION Turkey Accepted
Effect of turbidity on the Visibility of sunlight in urban area and on the performance of Crystalline Silicon Heterojunction (c-Si-HJ) solar cells
POSTER PRESENTATION Algeria Accepted
Effect of adding silicon particles (n-Si, p-Si) on the optical and photo-electrochemical properties of polybithiophene conducting polymer
POSTER PRESENTATION Algeria Accepted
Structural, electronic, optical and thermodynamic properties of SrxCa1-xO, BaxSr1-xO and BaxCa1-xO alloys
POSTER PRESENTATION Algeria Accepted
DESİGN AND ANALYSİS OF INDUSTRİAL HEAT TREATMENT FURNACE
POSTER PRESENTATION Turkey Accepted
ANALYSIS OF THE INFLUENCE OF COMPRESSION RATIO ON FLYWHEEL DIMENSIONING FOR A SINGLE-CYLINDER ENGINE
ORAL PRESENTATION Italy Accepted
Rehabilitation of machine parts operating with insufficient lubrication
POSTER PRESENTATION Algeria Accepted
Characterization of the impact of the welded structure on The mechanical properties of austenitic stainless steel
POSTER PRESENTATION Algeria Accepted
Performance Evaluation of Two Internal fixation systems in the Fracture of the Body & Angle area of the mandible by Biomechanical Testing and FEM
ORAL PRESENTATION Iran Accepted
Control of the oscillation velocity of photonic spot by mechanical wave frequency
POSTER PRESENTATION Turkey Accepted
ASSESSMENT OF THE PROFESSIONAL ENVIRONMENT: A LEVER FOR THE SAFETY AND DURABILITY OF THE COMPANY: STUDY CASE: ETRAG FOUNDRY OF CONSTANTINE, ALGERIA
ORAL PRESENTATION Algeria Accepted
Performance and emissions analysis of NG/diesel engine with water injection
ORAL PRESENTATION Jordan Accepted
Life Cycle Cost Analysis of Omer - Gecek Binary Geothermal Power Plant
ORAL PRESENTATION Turkey Accepted
Thermodynamic Performance and Optimization Analysis of Precooled Claude Liquefaction Cycle for Hydrogen Liquefaction
ORAL PRESENTATION Turkey Accepted
Variation in shear strength of the cement-implant interface of cemented hip stem
ORAL PRESENTATION Algeria Accepted
THE MATERIAL PROPERTIES OF FGM PLATES (AL / AL2O3) UNDER THE EFFECT OF THE VOLUME FRACTION
POSTER PRESENTATION Algeria Accepted
THEORETICAL INVESTIGATION OF MELTING OF ALUMINUM IN SOLAR PARABOLIC DISH SYSTEM
ORAL PRESENTATION Turkey Accepted
Modeling and Simulation of vibratory signals for rolling bearing fault diagnosis
POSTER PRESENTATION Algeria Accepted
A macroscopic investigation to interpret the absorption and desorption of hydrogen in Mg50Ni45Co0.5 alloy using the grand canonical ensemble
POSTER PRESENTATION Tunisia Accepted
Simultaneous optical scanners obtained by the mechanical wave propagation in water
POSTER PRESENTATION Turkey Accepted
A GENERALİZED DECOMPOSİTİON METHOD FOR SOLVİNG NONLİNEAR EQUATİONS OF MHD BOUNDARY LAYER FLOW İN THE PRESENCE OF A TRANSVERSE MAGNETİC FİELD
POSTER PRESENTATION Algeria Accepted
Numerical Analysis of the effect of electrode shape on the actuation ability of piezoelectric plates.
POSTER PRESENTATION Algeria Accepted
ZERO ENERGY BUILDING WITH THE FUTURISTIC APPROACH AND DECREASING OF THE POLLUTION
ORAL PRESENTATION Iran Accepted
INVESTIGATION OF APPLIED METHODS OF USING PASSIVE ENERGY IN IRANIAN TRADITIONAL URBAN DESIGN: CASE STUDY OF KASHAN CITY
ORAL PRESENTATION Iran Accepted
Study of phenomena leading to the explosion of clusters submitted to intense femtosecond laser fields.
POSTER PRESENTATION Algeria Accepted
AERODYNAMIC VALIDATION STUDY FOR MISSILE USING DIFFERENT METHODS AT SUPERSONIC MACH NUMBERS
ORAL PRESENTATION Turkey Accepted
New route of synthesis and characterization of an inorganic organic hybrid mixture by the sol-gel method
ORAL PRESENTATION Algeria Accepted
NUMERICAL STUDY OF THE PROPAGATION AND THE EFFECT OF SEMI-ELLIPTIC CRACKS IN POLYMER PIPES
POSTER PRESENTATION Algeria Accepted
Morphological and optical Characterization of ZnO thin films obtained by sputtering
POSTER PRESENTATION Algeria Accepted
RISK ASSESSMENT RELATED TO OCCUPATIONAL HEALTH AND SAFETY OF KASTAMONU INTEGRATED WOOD INDUSTRY LAMINATE PARQUET PRODUCTION LINE
ORAL PRESENTATION Turkey Accepted
MICROSTRAIN IN ZINC OXIDE LOZENGES INDUCED BY THE PRACTICED PRESSURE
POSTER PRESENTATION Algeria Accepted
Biogas Estimation based on Animal Waste for Adana, TURKEY
ORAL PRESENTATION Turkey Accepted
ORBITAL ANALYSIS OF A BREATHING CRACKED ROTOR DURING ITS PASSAGE THROUGH THE SUBCRITICAL SPEEDS
POSTER PRESENTATION Algeria Accepted
THERMOMECHANICAL BEHAVIOR OF PLATES IN INSULATING MATERIALS USED IN PANELS USED IN SOLAR PANELS
POSTER PRESENTATION Algeria Accepted
Investigation of the anticorrosion resistance of the Hydrophobic thin amorphous silicon films In 3% sodium chloride aqueous solutions
POSTER PRESENTATION Turkey Accepted
EFFECT of FILLER NANOPARTICLES AND COMPATIBILIZER ON THE MECHANICAL AND MORPHOLOGICAL PROPERTIES OF RECYCLED THERMPOPLSTIC MATRIX
ORAL PRESENTATION Algeria Accepted
Accelerated computation of the wake of a horizontal axis wind turbine in un-steady operation using the vortex approach
POSTER PRESENTATION Algeria Accepted
Natural Gas Distribution Network in Supply Security Support: Demand Forecast Study for Istanbul
POSTER PRESENTATION Turkey Accepted
ANALYSİS AND DESİGN OF CONCENTRATED SOLAR POWER COMPONENTS
ORAL PRESENTATION Turkey Accepted
Investigating the effects of cylinder disablement on diesel engine fuel economy and exhaust temperature management
ORAL PRESENTATION Turkey Accepted
Numerical Investigation Of Optimum Pin Fin Heat Sink Parameters in Electronic Cooling
ORAL PRESENTATION Turkey Accepted
Energy and Exergy Analyses of a Single-Stage Vapor-Compression Refrigeration Cycle Using Nanoparticle/R134-a
ORAL PRESENTATION Turkey Accepted
Bending behavior in 03 points of a composite material with glass fiber and epoxy resin under the effect of sinusoidal signals, square, and triangular
POSTER PRESENTATION Algeria Accepted
COMPARISON OF EXTENSIVE CONTROL METHODS AND LMI CONTROL METHOD IN QUARTER CAR MODELLING
ORAL PRESENTATION Taiwan Accepted
A COMPARATIVE STUDY OF OPTICAL PROPERTIES OF WO3THIN FILMS.
POSTER PRESENTATION Morocco Accepted
A New Strategy for Target and Thermal therapy of Lung Cancer by Specific Carbon Nanotube
ORAL PRESENTATION Iran Accepted
Mechanical and Physical study of Austenitic Stainless Steel
ORAL PRESENTATION Turkey Accepted
FRICTION BEHAVIOURS OF OF HEXAGONAL HONEYCOMB CORE
ORAL PRESENTATION France Accepted
Improvement On the mechanical properties of Ag/Cu nanocomposite by indentation
ORAL PRESENTATION Algeria Accepted
THE STRESS ANALYSIS OF SPIN COATED ZINC OXIDE THIN FILMS
POSTER PRESENTATION Algeria Accepted
Development of a New Algorithm for Sizing of evolutionary Hamilton–Jacobi–Bellman equations
POSTER PRESENTATION Iran Accepted
DESIGN AND PROPERTIES OF THERMAL BARRIER COATING
ORAL PRESENTATION Germany Accepted
ANALYSIS OF BEAMS ON ELASTIC FOUNDATION
ORAL PRESENTATION Turkey Accepted
Experimental investigation of ballistic carbon nanotube field
ORAL PRESENTATION Turkey Accepted
Theoretical and experimental comparison of wear properties of TiB2/Al
POSTER PRESENTATION Tunisia Accepted
THE MECHANICAL PROPERTIES OF HEAT TREATMENT ON THE MICROSTRUCTURE
ORAL PRESENTATION Tunisia Accepted
A PRACTICAL METHOD FOR RADIATIVE COOLING OF STRUCTURES
ORAL PRESENTATION Algeria Accepted
CHARGE TRANSFER CATALYSIS AT SEMICONDUCTOR NANO-FILM/ELECTROLYTE INTERFACE ENHANCING LIGHT-TO-ELECTRICITY CONVERSIONS
ORAL PRESENTATION West Bank Accepted
NUMERICAL INVESTIGATION ON THE EXTERNAL FLOW OF TUBE BANK
ORAL PRESENTATION Turkey Accepted